[Asterisk-Users] analog phone/door buzzer going through a SipuraSPA2000 ATA dials really slowly

[Angus Comber]

The unit dials 300 and in my extensions.conf I have:

exten => 300,1,Dial(SIP/200&SIP/201,30)
exten => 300,2,Hangup

So perhaps it is some setting in the Sipura ATA?





----- Original Message ----- 
From: "Matt Riddell" <matt.riddell at sineapps.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Friday, September 30, 2005 1:51 PM
Subject: Re: [Asterisk-Users] analog phone/door buzzer going through a 
SipuraSPA2000 ATA dials really slowly


> Angus Comber wrote:
>> Hello
>>
>> We have setup a doorbell which has an inbuilt analog phone which is
>> connected to our Asterisk via a SPA2000 ATA.  The problem we are getting
>> is that when a caller presses the buzzer it is taking two or more
>> minutes to finally call the reception phone.
>
> Asterisk will not cause it to wait two or more minutes.  3 seconds yes, 2
> minutes, no...
>
> Unless you have some funky gotoifs or loops or waits etc..
>
> -- 
> Cheers,
>
> Matt Riddell
> _______________________________________________
>
> http://www.sineapps.com/news.php (Daily Asterisk News - html)
> http://www.sineapps.com/rssfeed.php (Daily Asterisk News - rss)
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>