[Asterisk-Users] Fritz, mISDN, Help
Jörg Wolf
Joerg.Wolf at pass-consulting.com
Fri Sep 30 03:58:44 MST 2005
Hi Derek,
well, don't know anything about the SMP warning, in my case there's a simliar warning regarding PREEMPTIBLE setting which I simply ignored...
You might also have a look onto this: http://bugs.digium.com/view.php?id=4077
Crossing fingers...
cheers
Jörg
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
> Derek Conniffe
> Sent: Friday, September 30, 2005 12:48 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Fritz, mISDN, Help
>
> Hi again Jörg,
>
> The install_misdn Makefile doesn't seem to like my SMP "yes"
> in my kernel .config (it does a grep on the .config file,
> finds the line, and tells me) - I'm going to try the
> chan_misdn driver anyway and the server is an old HP
> netserver e800 which is a dual processor PIII board.
> Actually I'm only running one processor in it because, for
> reasons unknown to me, SuSE linux (9.1) grinds to almost a
> halt with two processors on board but I'd say I need to SMP
> option on in the kernel config in order to use this
> motherboard (although I'm not against changing the
> motherboard if necessary).
>
> I'll let you know how I get on,
>
> Derek
>
> Jörg Wolf wrote:
>
> >Derek,
> >
> >I've got up to 3 Fritz cards (of different types) up and
> running on my debian sarge (2.6.8 kernel).
> >
> >That's how it should work:
> >- build and install mISDN and chan_misdn from the current
> >install-misdn.tar.gz which can be downloaded from
> >http://www.beronet.com/download/
> >- use the chan_misdn and change /etc/asterisk/misdn.conf
> according to
> >your special config
> >- be sure that no capi modules are loaded
> >- do "/etc/init.d/misdn-init config" to automatically create
> >/etc/misdn-init.conf
> >- start the cards: "/etc/init.d/misdn-init start"
> >- start your * and check if chan_misdn.so started properly
> >
> >Hope it helps
> >
> >Cheers
> >Jörg
> >
> >
> >
> >>-----Original Message-----
> >>From: asterisk-users-bounces at lists.digium.com
> >>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Derek
> >>Conniffe
> >>Sent: Friday, September 30, 2005 10:39 AM
> >>To: konrads.smelkovs at gmail.com; Asterisk Users Mailing List -
> >>Non-Commercial Discussion
> >>Subject: Re: [Asterisk-Users] Fritz, mISDN, Help
> >>
> >>I big problem (for me) is that it seems that the AVM Fritz CAPI
> >>drivers cannot support more than one PCI card per server.
> There is a
> >>hack out there for multiple cards and a 2.4.XX kernel but
> this is not
> >>supported for the 2.6.XX kernels.
> >>
> >>mISDN on the other hand does support multiple AVM Fritz cards but I
> >>couldn't seem to get mISDN -> CAPI -> chan_capi working
> right (I tried
> >>for hours and I can't remember what exactly the problem was now -
> >>everything did load OK but calls were not being received
> correctly I
> >>think). I didn't try using chan_misdn.
> >>
> >>Now I'm running a solution which does not make me happy at
> all - I've
> >>got a second asterisk box beside the main one for the other
> AVM Fritz
> >>ISDN card and sending the received calls over via. IAX2 to
> the primary
> >>server (I shudder when I think of the waste of electricity).
> >>
> >>Is anyone out there running two AVM Fritz ISDN cards? Are
> you using a
> >>2.6.XX kernel? How are you doing it?
> >>
> >>Thanks,
> >>
> >>Derek
> >>
> >>
> >>
> >>Konrads Smelkovs wrote:
> >>
> >>
> >>
> >>>Unfourtunatley, mISDN is far from production quality. So going
> >>>miSDN->CAPI->chan_capi might not work. chan_misdn is even
> more flakey
> >>>at the moment.
> >>>
> >>>Your best option is to use just CAPI and chan_capi,it had
> >>>
> >>>
> >>support for
> >>
> >>
> >>>fritz
> >>>
> >>>On 10/09/05, Jon Dean <jtw.dean at gmail.com> wrote:
> >>>
> >>>
> >>>
> >>>
> >>>>A plea to all!
> >>>>
> >>>>Has anyone had any success with two or more avm fritz pci
> >>>>
> >>>>
> >>cards with
> >>
> >>
> >>>>either misdn, chan_misdn, or chan_capi, and any version of
> >>>>
> >>>>
> >>linux 2.6.x?
> >>
> >>
> >>>>I have managed to get misdn to load under 2.6.13 and detect
> >>>>
> >>>>
> >>two cards
> >>
> >>
> >>>>using misdn-capi and chan-capi (using capiinfo and capi info under
> >>>>asterisk) - but the second card/controller doesn't answer
> >>>>
> >>>>
> >>or dial calls.
> >>
> >>
> >>>>But if I try misdn without capi I get the following error
> >>>>
> >>>>mISDN: INTERNAL ERROR in drivers/isdn/hardware/mISDN/stack.c:596
> >>>>
> >>>>
> >>>>Any help would be greatly appreciated.
> >>>>
> >>>>Jon
> >>>>_______________________________________________
> >>>>--Bandwidth and Colocation sponsored by Easynews.com --
> >>>>
> >>>>Asterisk-Users mailing list
> >>>>Asterisk-Users at lists.digium.com
> >>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>To UNSUBSCRIBE or update options visit:
> >>>> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>>
> >>--
> >>Derek Conniffe
> >>Rivertower Ltd
> >>DID Number: 01 440 1806 (International: 00 353 1 440 1806)
> >>Ireland: (Freephone) 1800 719 400
> >>Ireland: (Local) 01 440 1800
> >>United Kingdom: 0870 068 2368
> >>International: 00 353 1 440 1800
> >>Derek Conniffe Mobile: 086 856 3823 (International: 00 353 86
> >>856 3823)
> >>Fax: 01 201 0085 (International: 00 353 1 201 0085)
> >>Email: Derek at rivertower.ie
> >>Web: http://www.rivertowerhosting.com
> >>
> >>
> >>
> >>
> >_______________________________________________
> >--Bandwidth and Colocation sponsored by Easynews.com --
> >
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
>
>
> --
> Derek Conniffe
> Rivertower Ltd
> DID Number: 01 440 1806 (International: 00 353 1 440 1806)
> Ireland: (Freephone) 1800 719 400
> Ireland: (Local) 01 440 1800
> United Kingdom: 0870 068 2368
> International: 00 353 1 440 1800
> Derek Conniffe Mobile: 086 856 3823 (International: 00 353 86
> 856 3823)
> Fax: 01 201 0085 (International: 00 353 1 201 0085)
> Email: Derek at rivertower.ie
> Web: http://www.rivertowerhosting.com
>
>
More information about the asterisk-users
mailing list