[Asterisk-Users] Broadvoice inbound issues

[Klaus Sonnenleiter]

I've had the same problem. But it was due to a silly mistake: I followed the instructions on
their web site literally (should have known better ;)). For asterisk as your BYOD device, they
tell you all the steps except for one - you need to include an instruction in your dialplan
for the incoming number. So if your number is 123-4567 in the 890 area code, you'd need
something like

exten => 8901234567,1,Answer
exten => 8901234567,2,Dial(Zap/g1,20,20)
exten => 8901234567,3,Hangup

in your dialplan. (example for forwarding the call to an analog phone, but works the same for
a SIP extension). It's missing from the docs, but after inserting this section, everything
started working for me.

HTH

Klaus

--- Rene Nelson <neririn at gmail.com> wrote:

> My SIP seems to be configured correctly as I can dial out and my minutes
> show up on my broadvoice bill, but whenever anyone calls my broadvoice #
> inbound they just get a busy signal. I dont get anything in the logs saying
> anything came in from broadvoice at all.
> 
> Has anyone had this/simmilar problem with inbound from Broadvoice? Any
> suggestions?
> 
> Thanks
> 
> Neri
> > _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users