[Asterisk-Users] zttest - 100% ?

[Marco Supino]

Hi,

My TDM is on its own IRQ, and the x306 has only one full-size PCI slot.. 
so no playing with it,

what results do you get from zttest ? what IRQ is the card on ?

Marco.


Damian Funnell wrote:
> Have you checked that the TDM400P isn't sharing an IRQ with anything 
> else?  Don't trust /proc/interrupts - run lspci -v to confirm this.
> 
> We have * running on an x206 and found that the only way to stop the 
> TDP400P sharing an IRQ with other devices was to juggle cards between 
> slots.
> 
> Hope this helps!
> Damian.
> 
> FFF Managed Technology Ltd
> 60 Cook St
> P.O. 6368 Wellesley St
> Auckland
> t +64 9 356 2911
> f +64 9 358 9070
> m +64 21 415 297
> w www.fff.co.nz
> 
> 
> 
> Marco Supino wrote:
> 
>> Hi,
>>
>> I would like to know what type of configuration could get me closer to 
>> 100% hits in zttest, when testing a TDM400P with 4 FXO ports,
>>
>> I am currently running kernel 2.4.31, on a IBM Xseries 306, with 3gh 
>> CPU, HT is disabled, PCI latency was changed, i still cant get more 
>> then 99.975% in the zttest testings,
>>
>> Thanks for any info.
>>
>> Marco.
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation sponsored by Easynews.com --
>>
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>