[Asterisk-Users] Re: Delay in Dial

[yusuf]

Hi,
The only reason I have an 'Answer' is because of the delay, the PBX cuts 
the call even before the SIP starts ringing, so the call is half only, 
i.e the SIP user answers but the PBX has already dropped the call.  So 
the Answer stopped this from happening.

I still need help on the delay


> Hi,
>  Try taking out "Answer" in your extensions.conf.
> You don't need to answer before dialing a SIP channel.
>  cheers.
> AK
> 
> 
>  On 9/28/05, yusuf <yusuf at ecntelecoms.com> wrote:
> 
>>Hi all,
>>
>>I am using Asterisk CVS, and I am getting a huge delay in dialing SIP.
>>This Asterisk box is taking calls from a PABX over ZAP, then dialing SIP
>>users.
>>So, a user '0251' dials from his phone, the PABX sends it the my
>>Asterisk box, no delay, then I get a 15 sec delay, before it actually
>>dials the end SIP user.
>>
>>1 -- Accepting call from '0251' to '0834541083' on channel 0/1, span
>>2 -- Executing NoOp("Zap/1-1", "0834541083") in new stack
>>3 -- Executing Answer("Zap/1-1", "") in new stack
>>4 -- Executing Dial("Zap/1-1","SIP/0834541083 at 192.168.11.111:5060")in
>>5 new stack
>>6 -- Called 0834541083 at 192.168.11.111:5060
>>7 -- SIP/192.168.11.111:5060-1699 is ringing
>>8 -- SIP/192.168.11.111:5060-1699 is ringing
>>9 -- SIP/192.168.11.111:5060-1699 is ringing
>>
>>
>>When the call is placed, Asterisk executes until Line 5. There is a 10
>>-15 sec delay between Line 5 and Line 6. Once Line 6 has executed, only
>>then does it dial
>>
>>Can anyone help
>>
>>yusuf