[Asterisk-Users] TE205P in loopback?

[Steve Totaro]

If the cables are connected and the lights are still flashing red then I suspect that the cable is the issue.
  ----- Original Message ----- 
  From: Franciraldo Cavalcante Junior 
  To: asterisk-users at lists.digium.com 
  Sent: Wednesday, September 28, 2005 5:44 PM
  Subject: Re: [Asterisk-Users] TE205P in loopback?


  I did the cable and configuration as recomended, but I may have another problem. After I run:

  modprobe zaptel 

  modprobe wct2xxp

  I don't see the boards flashing green it's flashing red and in sync, as I implicitly understand from your message . Should it flash green and when correctly cabled and configured, keep green?

  How can I debug this?

  any help is appreciated.



  -f




----------------------------------------------------------------------------
    From: "Steve Totaro" <asterisk at totarotechnologies.com>
    Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion<asterisk-users at lists.digium.com>
    To: "Asterisk Users Mailing List - Non-Commercial Discussion"<asterisk-users at lists.digium.com>
    Subject: Re: [Asterisk-Users] TE205P in loopback?
    Date: Wed, 28 Sep 2005 20:12:40 -0700


    I just did this on a te410p.  

    make a t1 crossover, cross pins one with four, and two with five.  Set one span for pri_cpe and the other side for pri_net.  boom, you are done and can start testing.  the lights should turn solid green and you should first see the  D channels come up and then all the B channels, if this happens, you have done it correctly.

    thanks,
    Steve
      ----- Original Message ----- 
      From: Franciraldo Cavalcante Junior 
      To: asterisk-users at lists.digium.com 
      Sent: Wednesday, September 28, 2005 4:46 PM
      Subject: [Asterisk-Users] TE205P in loopback?


      I'm a new * user and had just intalled A TE205P line in my Linux machine (running linux kernel 2.6.10). I would like to test the T1 interface but I don't have an ISDN PRI interface available right now. Is there a way to make some sort of loopback test? How to configure it? Do I need the cables to have tx/rx exchanged? 

      Any help would be appreciated.

      - f


       



--------------------------------------------------------------------------


      _______________________________________________
      --Bandwidth and Colocation sponsored by Easynews.com --

      Asterisk-Users mailing list
      Asterisk-Users at lists.digium.com
      http://lists.digium.com/mailman/listinfo/asterisk-users
      To UNSUBSCRIBE or update options visit:
         http://lists.digium.com/mailman/listinfo/asterisk-users 


--------------------------------------------------------------------------


      No virus found in this incoming message.
      Checked by AVG Anti-Virus.
      Version: 7.0.344 / Virus Database: 267.11.8/113 - Release Date: 9/27/05



    >_______________________________________________
    >--Bandwidth and Colocation sponsored by Easynews.com --
    >
    >Asterisk-Users mailing list
    >Asterisk-Users at lists.digium.com
    >http://lists.digium.com/mailman/listinfo/asterisk-users
    >To UNSUBSCRIBE or update options visit:
    > http://lists.digium.com/mailman/listinfo/asterisk-users





------------------------------------------------------------------------------


  _______________________________________________
  --Bandwidth and Colocation sponsored by Easynews.com --

  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users


------------------------------------------------------------------------------


  No virus found in this incoming message.
  Checked by AVG Anti-Virus.
  Version: 7.0.344 / Virus Database: 267.11.8/113 - Release Date: 9/27/05
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050928/604ea38b/attachment.htm