[Asterisk-Users] What ISDN hardware would you recommend?

[Armin Schindler]

On Mon, 26 Sep 2005, Francesco Peeters wrote:
> Trying again...
> 
> *Summary:*
> I need to have 2 machines with 4 BRI connections, 2 in NT mode, 2 in TE
> mode and 1 machines with 2 BRI connections, 1 in NT mode, 1 in TE mode;
> What card(s) should I put in to these servers?
> 
> *The long story:*
> I have 3 locations I want to connect using (*) servers.
> 
> 1 of those has a single BRI with a Siemens DECT PABX.
> 1 of those has two BRI's with 2 Siemens DECT PABX's, each serving a
> different area.
> 1 of those has two BRI's and a 2 port Nova Compact PABX with DECT
> 
> First step would be to set up the (*) servers and have them
> interconnected. When all of that works we'd go on to connect them to the
> ISDN and connect the existing PABX's to the servers so we can - for now -
> maintain the existing environment but use (*) to route traffic on a least
> cost basis, as well as allow SIP/IAX connections from out of office
> locations.
> 
> The machines themselves will not pose much of a problem, but what ISDN
> hardware would you recommend for this? (1 site with 1 TE and 1 NT mode
> port, 2 sites with 2 TE and 2 NT mode ports)

I cannot compare with other cards, but I recommend the Eicon DIVA Server 
Cards (like 4BRI). I only use them and they work very good.

Armin