[Asterisk-Users] Call Back On Busy?

[BJ Weschke]

 Is there a functional reason why you'd use MeetMe here? I think probably
the easiest way to accomplish this is to use an DeadAGI script which can be
invoked via the 'h' extension in the context that would then perform the
functionality you're looking for and if they get through it should just
bridge the original caller back in.

On 9/26/05, Sherwood McGowan <madprofzero at yahoo.com> wrote:
>
> Anyone else out there have some thoughts? The customer wants to be able to
> control what can be redialed on busy, such as no international. I'm having
> my doubts as to whether or not this can be done. My idea seems like it would
> work, but after the customer hangs up, wouldn't the context stop processing?
>  Thanks,
> SKM
>
>  ------------------------------
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Damon Estep
> *Sent:* Monday, September 26, 2005 10:15 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* RE: [Asterisk-Users] Call Back On Busy?
>
>   This may not apply to your situation, but many ATAs and SIP phones have
> this feature built in to the device.
>
>  We use Linksys/Sipura and auto redial and last call return work without
> any special setup.
>
>   ------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Sherwood McGowan
> *Sent:* Monday, September 26, 2005 7:45 AM
> *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion'
> *Subject:* [Asterisk-Users] Call Back On Busy?
>
>  I know it's been touched on before, but no answers have been found to the
> best of my knowledge. I'm using a SIP only setup, with a sip provider giving
> PSTN and would like to see if anyone has an idea for creating redial busy
> using ${DIALSTATUS} and possibly MeetMe?
>
>  I figure something like this, but want to get feedback
>
>  1. Get callers last dialed number, if international number, do not allow.
>
> 2. Playback a stuttertone to caller
>
> 3. Disconnect caller
>
> 4. Ring intended party check dial status. If busy, wait 120 seconds and
> try again (do this for a total of 15 minutes)
>
> 5. If it's picked up, playback an announcement to the party and put them
> in a meetme conference
>
> 6. Ring the original caller and bridge them to the meetme conference.
>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com<http://easynews.com/>--
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050926/d1098a59/attachment.htm