[Asterisk-Users] IBM x306

[Sergio Serrano]

Hi all,
	we have same problem with a x346. Mainly, TE410P shares IRQ with
network card and if you change IRQ for this slot, automatically change IRQ
in network card.

Any idea?

srsergio

-----Mensaje original-----
De: George Pajari [mailto:George.Pajari at netVOICE.ca] 
Enviado el: lunes, 26 de septiembre de 2005 10:09
Para: Asterisk Users Mailing List - Non-Commercial Discussion
Asunto: Re: [Asterisk-Users] IBM x306


>>> I am building an asterisk pbx (1.0.9) on an IBM x306 SCSI machine,my 
>>> problem is that the BIOS assigns the same IRQ to the SCSI 
>>> controller, and the TDM400P, i have tried several options of making 
>>> the bios change the IRQ, but it will always move them together, 
>>> anyone with some info about my options ?
>>

Check the BIOS options -- many others in the x3nn Series as well as the
Netfinity before them allow you to specify the IRQ per slot through a deeply
buried BIOS config option. I'm not near my rack of IBM servers to boot one
to get the exact path but email me offline if you can't find it.

g.

-- 
George Pajari, netVOICE communications    604 484 VOIP (484 8647 x102)
Open Source VoIP/Telephony Specialists  1 877 NET VOIP (638 8647 x102)
                  www.netvoice.ca  www.ip-centrex.ca
      www.digium.ca www.grandstream.ca www.sipura.ca www.snom.ca

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users




-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.6/111 - Release Date: 23/09/2005