[Asterisk-Users] IBM x306

[Steve Totaro]

> On Sun, Sep 25, 2005 at 03:04:31AM +0200, Stefan de Konink wrote:
> > On Sun, 25 Sep 2005, Marco Supino wrote:
> >
> > > I am building an asterisk pbx (1.0.9) on an IBM x306 SCSI machine,my
> > > problem is that the BIOS assigns the same IRQ to the SCSI controller,
> > > and the TDM400P, i have tried several options of making the bios
change
> > > the IRQ, but it will always move them together, anyone with some info
> > > about my options ?
> >
> > Linux usually don't care about Bios settings, you could try kernel
cmdline
> > parameters. Acpi and IRQ are google terms for it.
>
> But it's the hardware (bios? interrupt controller) that sends the
> interrupts in the first place. Right?
>

I am pretty sure you can set the IRQs in BIOS on the X306.  I looked at an
x305 quickly and you can go into BIOS, select advanced setup, then PNP/PCI
Options, change to manual and set your IRQs there.