[Asterisk-Users] Orinoco Injectors

[Darren Wright]

Righto....I was asking if anyone knew if the orinoco's were standard
802.3af
 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Corey S.
McFadden
Sent: Friday, September 23, 2005 9:50 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Orinoco Injectors


> > Has anyone gotten the Lucent / Orinoco injectors (AE-1, AE-6, AE-12)

> > to work with the Cisco 79* series phones?
> >
> > I'm not sure if the are the statndard POE or not....
> 
> Cisco's phones are not standard POE.  They reversed the polarity, and 
> I think they run the power hot all the time.  Can't remember
specifically.


Cisco phones will work with any 802.3af standard 48V PoE midspan
injector or PoE switch.  You just need a patch cable made to the correct
spec.



*********************************************
This message has been scanned for viruses and
dangerous content, and is believed to be clean.

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users