[Asterisk-Users] ztdummy compile again
Kevin Collins
kcollins at itcc.com
Fri Sep 23 10:41:42 MST 2005
Mark,
Have you checked to make sure your kernel source is in the following directory :
/usr/src/linux-2.6.5-1.358'
>Makefile:434: .config: No such file or directory
It just seems to be complaining about not finding your kernel development source environment.
Kevin
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mark Benson
Sent: Friday, September 23, 2005 11:21 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] ztdummy compile again
When you say kernel development do you mean kernel sources (which I
have) or some other development tools/libs?
and a kernel build config file? make mrproper ? make oldconfig ? I've
done that much at least...
Mark
Kevin Collins wrote:
>Looks like you don't have kernel development installed and a basic kernel build config file generated.
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mark Benson
>Sent: Friday, September 23, 2005 8:55 AM
>To: asterisk-users at lists.digium.com
>Subject: [Asterisk-Users] ztdummy compile again
>
>Hi,
>
>I'm still strugling with getting an easy to use conference system
>implemented. I did have app_conference running, but today I upgraded
>asterisk to 1.0.9 and it stopped working. I've tried following the
>instructions for compiling app_conference on 1.0.7 but it didn't work.
>
>So I went back to ztdummy (I've not had any luck getting this to compile
>on FC2).
>
>Anyhoo, I've tried again and once again ztdummy fails to compile and the
>various disparate instructions on what is needed to get it running are
>not helping.
>
>If I run make linux26 then the zaptel drivers start to compile but then
>spews out a load of errors.
>
>Anyone have any ideas?
>
>============SNIP===========
>
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o gendigits.c
>cc -o gendigits gendigits.o -lm
>./gendigits
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" makefw.c -o makefw
>./makefw tormenta2.rbt tor2fw > tor2fw.h
>Loaded 69900 bytes from file
>./makefw pciradio.rbt radfw > radfw.h
>Loaded 42096 bytes from file
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztcfg.o ztcfg.c
>cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DBUILDING_TONEZONE -o zonedata.lo
>zonedata.c
>cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DBUILDING_TONEZONE -o tonezone.lo
>tonezone.c
>ar rcs libtonezone.a zonedata.lo tonezone.lo
>cc -o ztcfg ztcfg.o libtonezone.a -lm
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o torisatool.o torisatool.c
>cc -o torisatool torisatool.o
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztmonitor.o ztmonitor.c
>cc -o ztmonitor ztmonitor.o
>cc -o ztspeed.o -c ztspeed.c
>cc -o ztspeed ztspeed.o
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o zttool.o zttool.c
>cc -o zttool zttool.o -lnewt
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" zttest.c -o zttest
>cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
>-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o fxotune.o fxotune.c
>cc -o fxotune fxotune.o -lm
>/lib/modules/2.6.5-1.358/build
>make -C /lib/modules/2.6.5-1.358/build SUBDIRS=/usr/src/zaptel modules
>make[1]: Entering directory `/usr/src/linux-2.6.5-1.358'
>Makefile:434: .config: No such file or directory
> CC [M] /usr/src/zaptel/zaptel.o
>In file included from /usr/src/zaptel/zconfig.h:9,
> from /usr/src/zaptel/zaptel.c:40:
>include/linux/config.h:4:28: linux/autoconf.h: No such file or directory
>In file included from /usr/src/zaptel/zaptel.c:40:
>/usr/src/zaptel/zconfig.h:10:27: linux/version.h: No such file or directory
>/usr/src/zaptel/zconfig.h:68:41: missing binary operator before token "("
>In file included from include/linux/kernel.h:11,
> from /usr/src/zaptel/zaptel.c:42:
>include/linux/linkage.h:5:25: asm/linkage.h: No such file or directory
>In file included from include/linux/types.h:13,
> from include/linux/kernel.h:13,
> from /usr/src/zaptel/zaptel.c:42:
>include/linux/posix_types.h:47:29: asm/posix_types.h: No such file or
>directory
>In file included from include/linux/kernel.h:13,
> from /usr/src/zaptel/zaptel.c:42:
>include/linux/types.h:14:23: asm/types.h: No such file or directory
>In file included from include/linux/kernel.h:13,
> from /usr/src/zaptel/zaptel.c:42:
>include/linux/types.h:18: error: syntax error before "__kernel_dev_t"
>include/linux/types.h:18: warning: type defaults to `int' in declaration
>of `__kernel_dev_t'
>include/linux/types.h:18: warning: data definition has no type or
>storage class
>include/linux/types.h:21: error: syntax error before "dev_t"
>include/linux/types.h:21: warning: type defaults to `int' in declaration
>of `dev_t'
>include/linux/types.h:21: warning: data definition has no type or
>storage class
>include/linux/types.h:22: error: syntax error before "ino_t"
>include/linux/types.h:22: warning: type defaults to `int' in declaration
>of `ino_t'
>include/linux/types.h:22: warning: data definition has no type or
>storage class
>include/linux/types.h:23: error: syntax error before "mode_t"
>include/linux/types.h:23: warning: type defaults to `int' in declaration
>of `mode_t'
>include/linux/types.h:23: warning: data definition has no type or
>storage class
>include/linux/types.h:24: error: syntax error before "nlink_t"
>include/linux/types.h:24: warning: type defaults to `int' in declaration
>of `nlink_t'
>include/linux/types.h:24: warning: data definition has no type or
>storage class
>include/linux/types.h:25: error: syntax error before "off_t"
>include/linux/types.h:25: warning: type defaults to `int' in declaration
>of `off_t'
>include/linux/types.h:25: warning: data definition has no type or
>storage class
>include/linux/types.h:26: error: syntax error before "pid_t"
>include/linux/types.h:26: warning: type defaults to `int' in declaration
>of `pid_t'
>include/linux/types.h:26: warning: data definition has no type or
>storage class
>
>=================
>
>_______________________________________________
>--Bandwidth and Colocation sponsored by Easynews.com --
>
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>--Bandwidth and Colocation sponsored by Easynews.com --
>
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 2930 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050923/8c1e3e6d/smime.bin
More information about the asterisk-users
mailing list