[Asterisk-Users] zaphfc problem: overlapdial don't work after
update bristuff
tuned at fan.priv.at
tuned at fan.priv.at
Fri Sep 23 01:41:07 MST 2005
hello,
I have a asterisk box (Slackware 9.1.0, Linux 2.4.31) connected to a
Ericsson Businessphone PBX on the internal S0 bus with HFC-S card and
zaphfc driver - point2point mode -.
---------
| TELCO |
| BRI |
---------
|
| PBX external S0
--------
| PBX |
--------
| PBX internal P2P S0 NT Mode
|
| HFC-S Card P2P TE Mode
---------
| * |
| BOX |
---------
Since nearly one year it runs Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b
fine. after dialing the internal S0 number (61) I get overlapdial and
dialtone.
[example dial the PBX S0 with Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b]
-- Accepting AUTHENTICATED call from 192.168.255.1, requested format = 8, actual format = 8
-- Executing Dial("IAX2/ogo at call_saar/1", "Zap/g1/61|60") in new stack
-- Called g1/61
Sep 23 10:27:50 NOTICE[229390]: chan_zap.c:8725 pri_dchannel: SETUP_ACK for 'Zap/1-1'
-- Accepting overlap call from '' to '<unspecified>' on channel 0/2, span 1
-- Starting simple switch on 'Zap/2-1'
^^^^^^^^
here I get a dialtone from PBX and I can dial
start dialing for 8 seconds
for different reasons I tried to update on latest bristuff-0.2.0-RC8n.
after update the zaphfc overlap dial don't work anymore.
when I dial the S0 bus it jumps directly into 's' extension,
which does not exisist in the context and I get 'no number' from PBX.
zapata.conf:
------------
[channels]
switchtype = euroisdn
signalling = bri_cpe
pridialplan=local
echocancel=yes
immediate=no
overlapdial=yes
group = 1
faxdetect=both
context=fromisdn
channel => 1-2
zaptel.conf:
------------
loadzone=nl
defaultzone=nl
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
extension.conf:
[fromisdn]
; example dial to BRI on other location
exten => _0.,1,Dial(IAX2/call_saar/${EXTEN}@intern,60)
exten => _0.,2,Congestion
exten => _0.,102,Hangup
More information about the asterisk-users
mailing list