[Asterisk-Users] How can i call to a cellphone here in Mexico?

[Claudio Canseco]

Hi, thanks for your replay Alex:
  Right now a have an Asterisk server on a Dell Optiplex GX110 (PIII 666MHz,
320 RAM) with no soundcard.
With an X100P clone card (an ambient modem).
 Everything looks good, I've been able to make local calls trough PSTN, IAX,
SIP.
I only have 1 POTS line, and 4 SIP softphones (X-lite) running all right.
The only problem so far I have noticed (or realized of :P), it is that i can
make calls
to cellularphone numbers, * tries to connect but i get redirected to the
emergency service number 066.
 I don't think it is because of my dialplan, eventhough I tried several
configurations. Anyways here is part of the dialplan
where my softphones make calls:


;########################################
;# Llamadas salientes [outgoing] #
;########################################

[outgoing]
include => toPSTN
include => iaxtel
include => fwd-iax

;######## -> PSTN ########

[toPSTN] ; Permite hacer llamadas locales (7-digitos sin contar 9)
ignorepat => 9

exten => _92XXXXXX,1,NoOp("Call for "${EXTEN:1})
exten => _92XXXXXX,2,Dial(Zap/1/${EXTEN:1})

exten => _904466XXXXXXXX,1,NoOp("Call for "(${EXTEN:1}) ;Llamadas a Celular
exten => _904466XXXXXXXX,2,Dial(Zap/1/ww${EXTEN:1})

;######## -> IAXTEL ########

[iaxtel]
exten => _1700XXXXXXX,1,Dial(IAX2/${cuenta}@iaxtel.com/${EXTEN}@iaxtel<IAX2/$%7Bcuenta%7D at iaxtel.com/$%7BEXTEN%7D at iaxtel>
)
exten => _1888NXXXXXX,1,Dial(
IAX2/${cuenta}@iaxtel.com/${EXTEN}@iaxtel<IAX2/$%7Bcuenta%7D at iaxtel.com/$%7BEXTEN%7D at iaxtel>
)
exten => _1877NXXXXXX,1,Dial(IAX2/${cuenta}@iaxtel.com/${EXTEN}@iaxtel<IAX2/$%7Bcuenta%7D at iaxtel.com/$%7BEXTEN%7D at iaxtel>
)
exten => _1866NXXXXXX,1,Dial(
IAX2/${cuenta}@iaxtel.com/${EXTEN}@iaxtel<IAX2/$%7Bcuenta%7D at iaxtel.com/$%7BEXTEN%7D at iaxtel>
)
exten => _1800NXXXXXX,1,Dial(IAX2/${cuenta}@iaxtel.com/${EXTEN}@iaxtel
<IAX2/$%7Bcuenta%7D at iaxtel.com/$%7BEXTEN%7D at iaxtel>)

;######## -> FWD ########

[fwd-iax]
exten => _3.,1,SetCallerId,${FWDCIDNAME}
exten => _3.,2,Dial(IAX2/${FWDNUMBER}:${FWDPASSWORD}@iax2.fwdnet.net/${EXTEN:1},60,tr)
<http://iax2/$%7BFWDNUMBER%7D:$%7BFWDPASSWORD%7D@iax2.fwdnet.net/$%7BEXTEN:1%7D,60,tr)>
exten => _3.,3,Congestion

 ;#########################################
;# Softphone x-lite #
;#########################################

[x-lite] ; Note: SIP extensions are defined here as "66" followed by any two
digits
include => default
include => servicios
include => outgoing

exten => 6600,1,NoOp(Llamada saliente maneja IAX2)
exten => 6600,2,Macro(dial,kano00,IAX2/kano00,20,tr)

exten => _X,1,NoOp(Llamada saliente maneja SIP)
exten => _X,2,Macro(dial,667${EXTEN},SIP/667${EXTEN},20,tr)

All softphones working are SIP, and are directed to the [x-lite] context.

This is my zapata.conf:

[channels]
language=es
context=incoming
signalling=fxs_ks.
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes

echocancel=yes
echocancelwhenbridged=yes
echotraining=800
rxgain=0.0
txgain=25.0

group=1
pickupgroup=1
immediate=yes
musiconhold=default
relaxdtmf=yes ; Relajar el DTMF, poner si asterisk salta o duplica algún
DTMF,
; dando lugar a un número incorrecto.
channel => 1

And my simple configuration file,
zaptel.conf:

loadzone=mx
defaultzone=mx
fxsks=1

As you can see this aren't complicated configurations because i only have 1
X100P card, and I am currently using little extensions.

Also, I am not using AMP but I'm thinking to installing it over my current
installation. I installed asterisk and zaptel from instructions i got from
several documentations sites (voip-info wiki, digium, etc).

Well, I hope this info can help to look down the problem. Thanks again,

Regards,

Claudio
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050921/107322bb/attachment.htm