[Asterisk-Users] Re: Re: how to distinguish the "ringing" and"connected"for zap channel

[Alchaemist]

This might be of help as well?

http://www.voip-info.org/tiki-pagehistory.php?page=Asterisk+Disconnect+Supervision&diff=3


"Liu Peter" <voipforum at gmail.com> wrote in message 
news:62fe4032050920122145d739d9 at mail.gmail.com...
1) how to config callprogress=yes ? in extensions.conf?
could you give me an example?
2) you means record the call (via zaptel) into a file and analyze it
with audio tool?

thanks..

2005/9/20, Alchaemist <info at lnet.com.ar>:
> Hi there,
>
>        Basically, youare supposed to play arround with indications.conf
>        To have the extensions configured with callprogress=yes but, be
> carefull because it is quite experimental.
>        Also, what I did was to get an audio program (Cooledit, Adobe
> audition, or other), and you should use the spectral view (FFT Fast 
> Fourier
> Transform), there you will be ableto see which frequencies the tones have,
> and their duration.
>
>        Now, having said that.... I was half successfull in making it work,
> and I still have some problems, so if anybody else has a clear idea of 
> what
> can be done, please shout in here ! :)
>
>
>        Give a look to this:
> http://www.voip-info.org/tiki-index.php?page=Asterisk+config+indications.conf
>        Particullaryl the section: Generating a Tone Set
>
>        And this:
> http://www.speech.kth.se/wavesurfer/
>
>        Cheers!
> Alchaemist
>
>
> "Liu Peter" <voipforum at gmail.com> wrote in message
> news:62fe4032050920103043d916b9 at mail.gmail.com...
> I have a TDM card in a asterisk machine.
> I found that once I used it to call out, the call status changed to
> "connected" even the callee is still ring.
> How could asterisk distinguish the "ringing" and "connected" in zap 
> channel?
>
> thanks.