[Asterisk-Users] Asterisk ISDN: Problem Setting CallerID as DID Extension Numbers.

[Voicomm User]

Thanks very much Armin.

After migrating to chan_capi-cm, the issue now is, everytime a dial 
statement is 
executed, it fails and restarts asterisk! The restart I believe is due to 
safe_asterisk 
script. So, in my opinion chan_capi-cm terminates asterisk process abruptly. 

When I replace the driver, everything comes back fine. I have updated the 
dial 
syntax to suit the new driver. My Dial command now is Dial(CAPI/g1/<dialled 
#>,30), 
I have even tried Dial(CAPI/contr1/<dialled #>,30)

Unfortunately there arent many messges displayed on CLI, since asterisk gets
a SIGSEGV.

Have people in this list had any successfull implementation with 
chan_capi-cm 
driver and Eicon Hardware?

Regards 
-r

On 8/28/05, Armin Schindler <armin at melware.de> wrote:
> 
> On Sun, 28 Aug 2005, Voicomm User wrote:
> > Hello Group,
> >
> > Current Setup:
> > - Eicon Quad BRI ISDN Card.
> > - 4 ISDN BRI (Telco: Telstra) Onramp2 services.
> > - Mode: Point2Point.
> > - 100 Indial Number ranges. Full National Number (9 digit format): 
> BAAAAAAXX
> >
> > where: B (Area code): 2/3/7/8
> > A (Normal Numbers)
> > X (99 Indial extensions)
> > eg: BAAAAAA00
> > BAAAAAA20 etc
> > Requirement:
> > - To be able send Indial numbers as Caller ID when dialing out.
> >
> > Configration:
> > capi.conf
> > ---------
> >
> > [general]
> > nationalprefix=0
> > internationalprefix=00
> > rxgain=0.8
> > txgain=0.8
> >
> > [interfaces]
> > mode=immediate
> > isdnmode=ptp
> > msn=BAAAAAA
> > incomingmsn=*
> > controller=1
> > softdtmf=1
> > accountcode=
> > context=main-menu
> > usecallerid=yes
> > callerid=asreceived
> > ;echosquelch=1
> > ;echocancel=yes
> > ;echotail=64
> > callgroup=1
> > pickupgroup=1
> > devices=2
> >
> > mode=immediate
> > isdnmode=ptp
> > msn=BAAAAAA
> > incomingmsn=*
> > controller=2
> > softdtmf=1
> > accountcode=
> > context=main-menu
> > usecallerid=yes
> > callerid=asreceived
> > callgroup=1
> > pickupgroup=1
> > devices=2
> >
> > mode=immediate
> > isdnmode=ptp
> > msn=BAAAAAA
> > incomingmsn=*
> > controller=3
> > softdtmf=1
> > accountcode=
> > context=main-menu
> > usecallerid=yes
> > callerid=asreceived
> > callgroup=1
> > pickupgroup=1
> > devices=2
> >
> >
> > mode=immediate
> > isdnmode=ptp
> > msn=BAAAAAA
> > incomingmsn=*
> > controller=4
> > softdtmf=1
> > accountcode=
> > context=main-menu
> > usecallerid=yes
> > callerid=asreceived
> > callgroup=1
> > pickupgroup=1
> > devices=2
> >
> >
> > extensions.conf
> >
> > [mob-service]
> > ; Calleridnum is of the format 0BAAAAAAXX and TRUNKMSD = 1, TRUNKCAPI = 
> CAPI
> > exten =>
> > ${PAT-MOB},1,Dial(${TRUNKCAPI}/${CALLERIDNUM:1}:${EXTEN:${TRUNKMSD}},,t)
> >
> >
> > Problem:
> > When dialling out the number *always* defaults to the default service
> > number.
> > I have contacted the telco and they have confirmed they expect the 
> caller id
> > in 9
> > digit format. I tried modifying msn value in capi.conf to include more 
> comma
> >
> > separated Full National Numbers of users internally. Eg.
> >
> > 
> msn=BAAAAAA00,BAAAAAA06,BAAAAAA07,BAAAAAA08,BAAAAAA09,BAAAAAA10,BAAAAAA11,BAAAAAA12,BAAAAAA13,BAAAAAA14,BAAAAAA15,BAAAAAA16,BAAAAAA17,BAAAAAA20,BAAAAAA21,BAAAAAA22
> >
> > This works fine upto BAAAAAA17, but for numbers from extentions 20 
> onwards I
> > get
> > a 'msn not found! check your config error'.
> >
> > Can anyone please shed somelight on whether this is really possible (to 
> be
> > able
> > to send DID numbers as caller ID when dialling out)? I have read some 
> posts
> > indicating more than 5 msns is not possible, but in my case I have
> > definetely
> > got it working with more than 5 msns atleast. No source clearly 
> indicated if
> > this
> > is possible, and if yes, how.
> 
> Use chan_capi-cm from sourceforge.net <http://sourceforge.net>, adapt your 
> capi.conf and the
> dialstring to new structure (see README of chan_capi-cm) and set your DID
> with e.g.
> SetCallerId(15)
> 
> Armin
> 
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050919/d69c79b2/attachment.htm