[Asterisk-Users] E1 configuration problem

[Gurminder Arora]

Hi,
    First of all make sure you have inserted zaptel and wxfx* modules
and 
Then execute ztcfg -vvvvvvvvvvv
It will show you the channels configured
and see its green signal now. :)

Regards
Gurminder


On 9/19/05, manish kumar <manish at tvtworld.com> wrote:
> I am trying to configure E1 card (Digium) but not able to do that. The
> green light doesn't come up when it starts.
> 
> What can be the problem. I have also changed the jumper settings of the
> card from T1 to E1 but still no relief.
> 
> Thanks in advance
> 
> Manish
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>