[Asterisk-Users] Seperate Incoming calls on TDM02?

[Tom Rymes]

There may be a better way, but you can use the incoming call settings  
in asterisk to point the first line at the first IVR. Then, if you  
search the archives, you will find a post by me regarding custom  
incoming routing and AMP, which describes how I did it. Be sure to  
read the whole thread, because my initial post had some errors in it.

  Tom

On Sep 15, 2005, at 12:04 PM, C. Hatton Humphrey wrote:

> I have a TDM02B to bring in two POTS lines for my incoming calls; I
> need to point each line to a different IVR... is there somewhere that
> can I can look to get this setup working?
>
> Basically, each line is for a different business. I know that for a
> DID the routing is simple but I'm not seeing where I can match up a
> DID with a Zap channel.
>
> I'm currently looking into the zapata.conf file to do this as it is my
> understanding that the control can be taken care of there.  My system
> is running A at H 1.5.
>
> Help!
> Hatton
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>