[Asterisk-Users] Cisco AS5400 Configuration as a SIP Peer - URGENT

Matt Roth mroth at imminc.com
Wed Sep 14 12:25:51 MST 2005


Leandro,

Thanks for the response.  Please let me know when you get your wiki page 
up.  I can be contacted at <mrothNOSPAM at imminc.com> (remove the NOSPAM 
from the address).

I've compiled a list of messages from Asterisk-Users that may be helpful 
to anyone else trying to configure a Cisco gateway:

Getting a Cisco gateway to work with Asterisk
Cisco Voip Question
How to pass Asterisk -SIP- Cisco AS -H323- world ?
cisco 3620 setup (newbie cisco alert)
Asterisk and Cisco AS5300 or 3600
BYE from Cisco gateway
Astrisk + Cisco 5350
Cisco/Asterisk codec negotiation problems
Asterisk and Cisco AS53xx/54xx Access ServerPlatform
about sip, asterisk and cisco ccme
asterisk - cisco as5400 (h,323) - PSTN
[*] SIP and CallerID

The following web page has an example configuration of a Cisco AS5350 as 
a SIP peer:

http://ertw.com/blog/archives/asterisk_and_an_as5350_sip_peer-190405.html

Thanks again,

Matthew Roth
InterMedia Marketing Solutions
Software Engineer and Systems Developer

Leandro Tenorio wrote:

>K, I'll make a page under wiki when I have my password back (I forgot it), I
>saw a lot of msg like this one.
>
>	There are several ways to configure it, below is one for in/out.
>BTW, In Cisco config's it's important to add security, to just let pass the
>call from your asterisk, Qos, etc. (not included) anyway it will work with
>this one.
>	Some of the config in the Cisco isnt needed to run but the
>troubleshooting will be easier
>	Just another recommendation, try to use the latest IOS and Nextport
>firmware with just the sw you need.
>



More information about the asterisk-users mailing list