[Asterisk-Users] Fedora Core 4 not recognizing X100P cards

[Innocent Evil]

como'n folks..  ...

>
> Well, as I told earlier.. my asterisk was running great with one fxo and
> one
> fxs module of a TDM400P
> All i tried last night to run asterisk with non-root
> I must did something wrong while I was trying to do that
>
> FXO module on channel # 1
> FXS module on channel # 4
>
> /etc/zaptel.conf
> ---------------------
> loadzone = us
> defaultzone=us
> fxoks=1
> fxsks=4
>
> /etc/asterisk/zapata.conf
> --------------------------------
> signalling=fxo_ks
> channel=1
> signalling=fxs_ks
> channel=4
>
> Did I made any mistake above?
>
> /etc/modprobe.conf
> -------------------------
> install wcfxo /sbin/modprobe --ignore-install wcfxo && /sbin/ztcfg
> install wctdm /sbin/modprobe --ignore-install wctdm && /sbin/ztcfg
> # there have more line in it.. i guess they are not important here
> alias wcfxs wctdm
>
> /etc/rc.d/init.d/asterisk
> -----------------------------
> #important lines are below
>   start)
>         /sbin/modprobe wctdm
>         daemon /usr/sbin/asterisk
>
>   stop)
>         killproc asterisk
>         /sbin/modprobe -r wctdm
>
> Here is the output of asterisk -vvvc
> Sep 13 22:18:11 WARNING[3982]: chan_zap.c:887 zt_open: Unable to specify
> channel 1: No such device
> Sep 13 22:18:11 ERROR[3982]: chan_zap.c:6612 mkintf: Unable to open
> channel
> 1: No such device
> here = 0, tmp->channel = 1, channel = 1
> Sep 13 22:18:11 ERROR[3982]: chan_zap.c:9990 setup_zap: Unable to
> register
> channel '1'
> Sep 13 22:18:11 WARNING[3982]: loader.c:403 __load_resource: chan_zap.so:
> load_module failed, returning -1
> Sep 13 22:18:11 WARNING[3982]: loader.c:543 load_modules: Loading module
> chan_zap.so failed!
>
> see I have channel # 1
> [root at asterisk ~]# ls -l /dev/zap/
> total 0
> crw-rw----  1 root asterisk 196,   1 Sep 13 22:20 1
> crw-rw----  1 root asterisk 196,   2 Sep 13 22:20 2
> crw-rw----  1 root asterisk 196,   3 Sep 13 22:20 3
> crw-rw----  1 root asterisk 196,   4 Sep 13 22:20 4
> crw-rw----  1 root asterisk 196, 254 Sep 13 22:20 channel
> crw-rw----  1 root asterisk 196,   0 Sep 13 22:20 ctl
> crw-rw----  1 root asterisk 196, 255 Sep 13 22:20 pseudo
> crw-rw----  1 root asterisk 196, 253 Sep 13 22:20 timer
>
>
> After all of this, if I comment out this from /etc/asterisk/zapata.conf
> /etc/asterisk/zapata.conf
> --------------------------------
> ;signalling=fxo_ks
> ;channel=1
> signalling=fxs_ks
> channel=4
>
> My asterisk run fine .. I just dont able to use my phone set attaced to
> my
> fxs module.
> And all I had to do is .. forward all incoming call to my voicemail box
> !!
>
> Should I consider my fxs card has burnt out !!
>
>
> Thanks for reading.. hope someone will reply me to help.
>
> Thanks again,
>
>