[Asterisk-Users] TDMoE Configuration problems

[Leonardo Gomes Figueira]

Kevin Bockman wrote:
> I'm having some problems getting TDMoE setup for the 1st time.  I have a 
> TE405P installed in the main server with an  ethernet cross-connection 
> to the secondary machine.
> 
> (Yes, I know about IAX2 but I want to use TDMoE to simulate using T1s.)
> 
> I'm using -HEAD from yesterday.
> 
> On the main machine
> /etc/zaptel.conf:
> loadzone = us
> defaultzone=us
> dynamic=eth,eth1/00:30:48:84:74:25,24,0
> bchan=1-23
> dhcan=24

If you loaded wct4xxp before ztd-eth/ztdynamic your channels should be:

1-96 TE405P
97-120 TDMoE

> *CLI> zap show status
> Description                              Alarms     IRQ        bpviol   
> CRC4
> T4XXP (PCI) Card 0 Span 1                OK                  0 0          0
> T4XXP (PCI) Card 0 Span 2                UNCONFIGUR          0 0          0
> T4XXP (PCI) Card 0 Span 3                UNCONFIGUR          0 0          0
> T4XXP (PCI) Card 0 Span 4                UNCONFIGUR          0 0          0
> Dynamic 'eth' span at 'eth1/00:30:48:84· RED                 0 0          0



   Leonardo