[Asterisk-Users] wctdm module won't load after kernel upgrade

[Dave Cotton]

On Mon, 2005-09-12 at 16:12 +0300, Dionisis Koumouras wrote:
> Hi all,
>  
> I have installed a TDM22B on an IBM xSeries 220 with FedoraCore 3 and
> setup asterisk cvs head to work properly.
>  
> A few days ago, I tried to update the system kernel to 2.6.12 from
> 2.6.9 and also to change to asterisk stable 1.0.9.
> After compiling zaptel and asterisk, i loaded zaptel and tried to load
> the wctdm module but this failed with the following message:
>  
> Notice: Configuration file is /etc/zaptel.conf
> line 206: Unable to open master device '/dev/zap/ctl'
>  
> I checked /dev/ and there is no /zap directory but, instead, some
> devices that look relevant like zap1, zap2 etc.
>  
> Obviously, if boot with the older kernel, wctdm will not load either.
>  

Udev?

README.udev


-- 
Dave Cotton <dcotton at linuxautrement.com>