[Asterisk-Users] RxFAX

[Lee Archer]

Does anyone have any ideas on why I can fax out using TxFax fine but I
can't receive?  The system detects a fax and...

    -- Executing RxFAX("Zap/1-1",
"/var/spool/asterisk/fax/1124786077.0.tif|debug") in new stack
Slow carrier up
Slow carrier down
Changed from phase 1 to 4
DIS:
  Prefer 256 octet blocks
  Can receive fax
  Supported data signalling rates: V.27ter and V.29
  R8x7.7lines/mm and/or 200x200pels/25.4mm
  2D coding
  Scan line length: 215mm
  Recording length: Unlimited
  Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
  R8x15.4lines/mm
  Minimum scan line time for higher resolutions: T15.4 = T7.7
  North American Letter (215.9mm x 279.4mm)
  North American Legal (215.9mm x 355.6mm)
>>> DIS: 80 00 ce f4 80 80 81 80 80 80 18
HDLC underflow in state 9
Changed from phase 4 to 3
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down
Slow carrier up
Slow carrier down

Is what I get.  I am using 1.0.9 and SpanDSP .18 with a 100XP card.

Regards

Lee
###########################################

This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050912/e94d9af3/attachment.htm