[Asterisk-Users] TE406p no interrupts

[Jason Kim]

I modified wct4xxp.c and installed it.
This is the message for 'modprobe wct4xxp'

--------------------------------------------------
FATAL: Error inserting wct4xxp
(/lib/modules/2.6.9-1.667smp/extra/wct4xxp.ko): No
such device
FATAL: Error running install command for wct4xxp
astpbx kernel: Oops: 0000 [1] SMP 
astpbx kernel: CR2: ffffffffa0362081

Regards,
Jason

--- Boris Bakchiev <boris at jildent.com.au> wrote:

> You should have just done this:
> rmmod wct4xxp
> rmmod zaptel
> modprobe wct4xxp
> 
> It will do the same thing
> 
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-
> > bounces at lists.digium.com] On Behalf Of Jason Kim
> > Sent: Monday, 12 September 2005 00:34
> > To: asterisk-users at lists.digium.com
> > Subject: RE: [Asterisk-Users] TE406p no interrupts
> > 
> > I modified wct4xxp.c and make clean; make linux26;
> > make install; reboot;
> > But the system is not rebooted.
> > Because the system is in remote office I will
> check it
> > next morning.
> > Could you let me know your linux version, *
> version
> > and motherboard?
> > 
> > Thank you Boris.
> > 
> > --- Boris Bakchiev <boris at jildent.com.au> wrote:
> > 
> > > Well.
> > > Try this please (but only if you're running on
> the
> > > latest sources).
> > > Open wct4xxp.c sources and search for
> > > pci_module_init
> > > Replace it with pci_register_driver
> > > So the line should read:
> > > res = pci_register_driver(&t4_driver);
> > >
> > > That allows you to get the card working on
> 2.6.13 in
> > > almost exactly the
> > > same setup as yours.
> > >
> > > One weird thing though. Do no use insmod
> > > ./wct4xxp.ko from zaptel
> > > directory as it will not work. Do a proper make
> > > install and then
> > > modprobe.
> > >
> > >
> > > This is just part of the fixes you might need to
> do.
> > > If you encounter a problem after span
> > > reconfiguration (ztcfg) let me
> > > know.
> > >
> > > If you get stuck.. let me know.
> > >
> > > Regards
> > >
> > > -----Original Message-----
> > > From: asterisk-users-bounces at lists.digium.com
> > > [mailto:asterisk-users-bounces at lists.digium.com]
> On
> > > Behalf Of Jason Kim
> > > Sent: Sunday, September 11, 2005 8:14 PM
> > > To: asterisk-users at lists.digium.com
> > > Subject: RE: [Asterisk-Users] TE406p no
> interrupts
> > >
> > > I'm using FC3.
> > >
> > > uname -a
> > > -----------------------------------------
> > > Linux billitipcc 2.6.9-1.667smp #1 SMP Tue Nov 2
> > > 15:09:11 EST 2004 x86_64 x86_64 x86_64 GNU/Linux
> > > _______________________________________________
> > > --Bandwidth and Colocation sponsored by
> Easynews.com
> > > --
> > >
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > >
> >
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >
> > >
> >
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > 
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> > _______________________________________________
> > --Bandwidth and Colocation sponsored by
> Easynews.com --
> > 
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> >
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com
> --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> 



	
		
______________________________________________________ 
Yahoo! for Good 
Watch the Hurricane Katrina Shelter From The Storm concert 
http://advision.webevents.yahoo.com/shelter