[Asterisk-Users] TE110P reset

[Jason Walker]

You are correct. I did not expand completely and stand corrected. An
additional note...we have some Dialogic cards (not associated with *) that
do the same thing on PRI.

Question - is it somewhat standard to have b chans restart on PRI circuits
when not explicitly configured to NOT reset? 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Andrew
Kohlsmith
Sent: Saturday, September 10, 2005 5:00 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] TE110P reset

On Saturday 10 September 2005 19:40, Jason Walker wrote:
> PRI channels will reset when not in use throughout the day. A reset on 
> a channel should not happen when that channel is in use. This happens 
> all the time on my PRI circuits (TE110P and TE410P). From what I 
> gather, it's somewhat like a handshake for the D chan between the cpe and
net sides.

Not exactly.  Digium's replicating the B channel resets someone noted in a
particular situation.  It's not required, but it shouldn't hurt.  If it's
causing trouble you can turn it off with resetinterval=0 in your
zapata.conf.

-A.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users