[Asterisk-Users] MAX PRI for single server (was: Not enoughlines available for Asterisk implemetation)

[PistolPete]

We run many servers with 4 Quad cards and have no problems, SANGOMA works
great for this !!



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of asterisk
groups
Sent: Thursday, September 08, 2005 6:12 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] MAX PRI for single server (was: Not
enoughlines available for Asterisk implemetation)

On Thu, 2005-09-08 at 16:26 +0200, Simone Cittadini wrote:

> Is it true ?
> My boss is just asking me if it is possible to stuck 4* TE411P in a 
> single server, for a total of 480 lines, someone can assure me it is 
> possible/impossible (manageable/unmanageable) from real-life experience ?
> 

You might want to offload some of that PRI termination to an external
device such as a Cisco AS53XX, Lucent MAX TNT, Audio Codes or Redfone
fonebridge device and then trunk it to your Asterisk servers. But
putting more then 2 quad cards in a single server is not safe. 1 per
server would be more acceptable.

This link might be helpful to you:
http://www.voip-info.org/tiki-index.php?page=Asterisk+at+large

Good luck.

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users