[Asterisk-Users] pri gateway

[Baris Simsek]

hi,

my asterisk version is 1.0.9

/etc/zaptel.conf
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31

it is comfortable with Turkish Telecom. i tried before and it works.

/etc/asterisk/zapata.conf
[channels]
switchtype=euroisdn
signalling=pri_cpe
context=incoming
group=1
channel=>1-15,17-31

Leds are lighting at start. When i run /etc/init.d/zaptel they go out. 
And i can see the modules are installed. and i see that, layer 1 is 
going up after zaptel. So i am sure there is no problem with drivers. I 
think it is connected to asterisk. any idea? thanks...

altus wrote:

>what about a copy of your zapata.conf and zaptel.conf,what color is the
>leds
>
>On Thu, 2005-09-08 at 12:42 +0300, Baris Simsek wrote:
>  
>
>>hello,
>>
>>i installed an asterisk as  a pri gateway. Everything is okay. 
>>/etc/init.d/zaptel starts successfull with wct4xxp module. 
>>/etc/init.d/asterisk starts also successfully. I tested my pri cable and 
>>it works. But still my span isn't up. I don't see any error. Do you have 
>>any idea? What else i should check? Thanks.
>>
>>My card is 4 span Wildcard TE410P 
>><http://www.digium.com/index.php?menu=product_detail&category=hardware&product=TE410P>
>>
>># lsmod
>>wct4xxp               106688  62
>>zaptel                226820  129 wct4xxp
>>
>># asterisk -r
>>gw*CLI> pri show span 1
>>Primary D-channel: 16
>>Status: Provisioned, In Alarm, Down, Active
>>Switchtype: EuroISDN
>>Type: CPE
>>Window Length: 0/7
>>Sentrej: 0
>>SolicitFbit: 0
>>Retrans: 0
>>Busy: 0
>>Overlap Dial: 0
>>T200 Timer: 1000
>>T203 Timer: 10000
>>T305 Timer: 30000
>>T308 Timer: 4000
>>T313 Timer: 4000
>>N200 Counter: 3
>>    
>>