[Asterisk-Users] newbie install problem. And I alreadysearchedeverywhere!

[brett at websmyths.com]

On Sat, 2005-09-03 at 20:47 +0200, Jeroen Baten wrote:
> I just changed in zapata.conf the signalling to:
> signalling = bri_net_ptmp
>
> and this changes the output considerably:
>
> *CLI>
>     -- Executing Dial("SIP/4001-2fea", "Zap/2/<mycellphonenumber}") in new
> stack
>     -- Called <mycellphonenumber}
>     -- Channel 0/2, span 1 got hangup
>     -- Hungup 'Zap/2-1'
>   == No one is available to answer at this time
>
> *CLI>

Ok - what the heck is this?--------------------v
Dial("SIP/4001-2fea", "Zap/2/<mycellphonenumber}")

I've never seen a } used in a dial statement...

I saw that in your first message and (too) quickly deleted it.

Brett