[Asterisk-Users] How to shorten ringing stop detection onX101Pclone?

[f6hqz-m at hamwlan.net]

Hello Goran,

Yes, you are right !
I have read too quickly your question, sorry.
I have checked myself with my * and same thing appears here.
If you will have the solution before me, please, post it  :-)

For F.T. prices list, it is not realy easy...
You can start by browsing from here :
http://www.agence.francetelecom.com/vf/home_pro/index.htm
And here :
http://www.francetelecom.com/fr/entreprises/grandes_entreprises/solutions/re
seaux/tarifs_voix/plan_tarif/att00028453/tarifs.html

But, there is a lot of different contracts and discounts...

Good Luck.

Best Regards,
Francois BERGERET,
France.


-----Message d'origine-----
De : Goran Dj. [mailto:pisac at hotpop.com] 
Envoyé : jeudi 1 septembre 2005 22:48
À : f6hqz-m at hamwlan.net; Asterisk Users Mailing List - Non-Commercial
Discussion
Objet : Re: [Asterisk-Users] How to shorten ringing stop detection
onX101Pclone?


This working only when zap answer call.
But, if zap don't answer (ringing), and (outside) caller hangup, then there
is no busy tone.

By the way, do you know some voip provider in Paris with Direct Inward Dial
numbers? Where can I found best information about prices of France Telecom
(PRI od BRI ISDN/RNIS, tarrifs, etc...)


----- Original Message ----- 
From: <f6hqz-m at hamwlan.net>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
<asterisk-users at lists.digium.com>
Sent: cet 1. sep 2005 7:13
Subject: RE : [Asterisk-Users] How to shorten ringing stop detection
onX101Pclone?


Hello Goran,

Modify your /etc/asterisk/zapata.conf like this :

busydetect=yes
busycount=3

And, of course, you must have chosen your correct country for ringing mode
in your /etc/zaptel.conf file :

loadzone=fr
defaultzone=fr

I am in France  :-)

Good luck !

Best Regards,
Francois BERGERET,
France.

-----Message d'origine-----
De : asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] De la part de Goran Dj.
Envoyé : jeudi 1 septembre 2005 02:26 À : Asterisk Users Mailing List -
Non-Commercial Discussion Objet : [Asterisk-Users] How to shorten ringing
stop detection on X101Pclone?


When x101p clone receive ring signal from phone line, my voip phone start
ringing. But, if caller hang-up at some time, phone continues to ringing 10
second more. How can I shorten that time?

Pause betwen incoming rings on my phone line is 4s, so when x101p clone
(wcfxo driver) do not receive next ring signal after 4.5 sec, call should be
consider as ended.

What should I change to set that time (4.5 sec) for incoming ring end
detection?


_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users