[Asterisk-Users] Polycom 301 second line registration,

[Jeremy Melanson]

Is your Asterisk server listening on port 5061? If not, just change the
entry to 5060.

On Wed, 2005-08-31 at 16:36 -0600, Andres Paglayan wrote:
> Hi,
> 
> I am having problems on getting the second line to work on a Polycom 301,
> 
> this is the phone.cfg file,
> the * box is 192.168.1.8 and the phone is 192.168.1.18
> I am not 100% sure about what the reg.x.address should be,
> with this setting I only get the line number to work,
> the second just gives me busy signal, and its extension is not available.
> I also tried 203 at 192.168.1.18 and 203 as the reg.2.address parameter but 
> without success,
> the 203 extension setting in Asterisk is a clon of the 200 except for 
> the id and the port, (that matches this conf file)
> 
> 
> <PHONE_CONFIG>
>         <OVERRIDES
>         reg.1.displayName="FD1"
>         reg.1.label="L1"
>         reg.1.address="192.168.1.18"
>         reg.1.server.1.address="192.168.1.8"
>         reg.1.server.1.port="5060"
>         reg.1.auth.userId="200"
>         reg.1.auth.password="123"
>         reg.2.displayName="FD2"
>         reg.2.label="L2"
>         reg.2.address="203 at 192.168.1.18"
>         reg.2.auth.userId="203"
>         reg.2.auth.password="123"
>         reg.2.server.1.address="192.168.1.8"
>         reg.2.server.1.port="5061"/>
> </PHONE_CONFIG>
> 
> Thanks for any help,
> 
> Andres
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users