[Asterisk-Users] I give up - Help with TE410P

[Bart Fisher]

I'm trying to install two TE410P's in one box. Would like to get 3 total.  I 
can always get one card to work.

If I install only one card, I will get green lights on all ports when loop 
back plugs installed - everything is perfect...

If I install 2 cards, I'll get yellow alarm on span 2 and 6 and 7.  Flashing 
Red alarm on span 1,3,4,5 and 8.

There is no error messages that I can find.

What is the correct procedure for installing these cards?  Can you give me a 
"step-by-step" on how to install these cards?    I've been working on this 
for a week and getting frustrated.\

TIA

Bart

Some info (not sure what else might be needed):

# cat /proc/interrupts
           CPU0
  0:    3593335          XT-PIC  timer
  1:        518          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5:         30          XT-PIC  aic7xxx
  7:      37562          XT-PIC  eth0
  8:          1          XT-PIC  rtc
  9:    3257067          XT-PIC  acpi, wctdm
 10:    3257002          XT-PIC  wct4xxp
 11:    3260152          XT-PIC  wct4xxp
 14:      13296          XT-PIC  ide0
NMI:          0
ERR:          0

# lspci -v
00:00.0 Host bridge: Broadcom GCNB-LE Host Bridge (rev 32)
        Flags: fast devsel

00:00.1 Host bridge: Broadcom GCNB-LE Host Bridge
        Flags: fast devsel

00:02.0 SCSI storage controller: Adaptec AIC-7892P U160/m (rev 02)
        Subsystem: Adaptec AIC-7892P U160/m
        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5
        BIST result: 00
        I/O ports at d800 [disabled] [size=256]
        Memory at fe000000 (64-bit, non-prefetchable) [size=4K]
        Expansion ROM at febe0000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2

00:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit 
Ethernet (rev 02)
        Subsystem: ASUSTeK Computer Inc.: Unknown device 80a9
        Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 7
        Memory at fd800000 (64-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at febd0000 [disabled] [size=64K]
        Capabilities: [40] PCI-X non-bridge device.
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Vital Product Data
        Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 
Enable-

00:04.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN 
interface
        Subsystem: Unknown device b100:0001
        Flags: bus master, medium devsel, latency 32, IRQ 9
        I/O ports at d400 [size=256]
        Memory at fd000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2

00:05.0 Communication controller: Unknown device d161:0410 (rev 02)
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at fc800000 (32-bit, non-prefetchable) [size=128]

00:06.0 Communication controller: Unknown device d161:0410 (rev 02)
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at fc000000 (32-bit, non-prefetchable) [size=128]

00:09.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 
(prog-if 00 [VGA])
        Subsystem: ATI Technologies Inc Rage XL
        Flags: bus master, stepping, medium devsel, latency 32, IRQ 10
        Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        I/O ports at d000 [size=256]
        Memory at fa800000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at feba0000 [disabled] [size=128K]
        Capabilities: [5c] Power Management version 2

00:0f.0 ISA bridge: Broadcom CSB6 South Bridge (rev a0)
        Subsystem: Broadcom: Unknown device 0201
        Flags: bus master, medium devsel, latency 32

00:0f.1 IDE interface: Broadcom CSB6 RAID/IDE Controller (rev a0) (prog-if 
8a [Master SecP PriP])
        Subsystem: Broadcom: Unknown device 0212
        Flags: bus master, medium devsel, latency 64
        I/O ports at <ignored>
        I/O ports at <ignored>
        I/O ports at <ignored>
        I/O ports at <ignored>
        I/O ports at 8800 [size=16]

00:0f.3 Host bridge: Broadcom GCLE-2 Host Bridge
        Subsystem: Broadcom: Unknown device 0230
        Flags: bus master, medium devsel, latency 0

# uname -a
Linux asterisk1.local 2.6.9-22.0.1.EL #1 Thu Oct 27 12:26:11 CDT 2005 i686 
i686 i386 GNU/Linux

# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping        : 9
cpu MHz         : 2799.826
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov 
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips        : 5521.40