[Asterisk-Users] x100p (FXO) not being seen by asterisk (is my bestguess) .

[Mr. James W. Laferriere]

	Hello All ,

On Fri, 28 Oct 2005, Mr. James W. Laferriere wrote:
> On Thu, 27 Oct 2005, Mr. James W. Laferriere wrote:
> > On Thu, 27 Oct 2005, Phil Pritchard wrote:
> > > only new to asterisk, but have had some hardware exp.....
> > >    stay away from irq9 its tied to irq2 and will always be shared, Paul has
> > > the go.. in bios disable serial and or usb (if not using) and make sure irda
> > > is not enabled. another one is the lpt port if your not using that, there is
> > > another irq you can steel..
> > 	ALL & I mean all serial/parrallel/...'everything I can find'... has been 
> > 	turned off in the bios .  And I have recompiled a kernel with those same 
> > 	items turned off in it .  That d??ned module wants to load at irq 9 no 
> > 	matter what I do .  Of course there is no way to set irq's to a 
> > 	particular pci slot in the bios .
> > 	Does anyone now howto set irq say at the boot: or in modprobe.conf ?
> > > dont share interrupts, as a rule(if you can help it)... it usually leads to
> > > system instability and usually under load.
> > 	Quite well understand this point .  Have heard it on this list many 
> > 	times .  And am doing my best NOT too .
> > > UBCD ...(www.ultimatebootcd.com).  has some nice tools that can probe a system
> > > to give a second appinion on interrupt conflicts, ram and hard drive
> > > errors.....
> > > its my best tool for hardware problems..
> > 	IMO ,  The mirrors have the su??iest download schemes I have seen in 
> > 	some time .\IMO
> > 	I have yet to burn that image but as soon as I do I'll boot it on that 
> > 	piece of junk I bought for near next to nothing .  Which is almost what 
> > 	it is worth ,  Nothing .
> > 		Thank you for your input ,  Every bit helps .  JimL

> 	Finally got that da??ed wcfxo to load on a irq by itself (*).  Had to 
> 	turn off the last item of the onbord devices the ether & buy an ether 
> 	card to get connectivity .  But even with the suggestion by 'Paul' to 
> 	use a two line cord & finally using a singular irq ,  The config's I 
> 	sent last time have not changed .  The x100p/wcfxo combination see the 
> 	line ringing (**) .  But asterisk does NOT see it on the console nor 
> 	does it pick up the line .  Quite frustrating when everything should be 
> 	ok per every example I've seen & still nothing positive to show for it .
> 	ANY suggestions/questions/... Please pipe up .  Tia ,  JimL

	For everybodies info ,  Make sure that there isn't an entry like ...

noload => chan_zap.so

	in /etc/asterisk/modules.conf .  That was what the problem was all 
	along .  Tnx to all who helped .  JimL

-- 
+------------------------------------------------------------------+
| James   W.   Laferriere | System    Techniques | Give me VMS     |
| Network        Engineer | 3542 Broken Yoke Dr. |  Give me Linux  |
| babydr at baby-dragons.com | Billings , MT. 59105 |   only  on  AXP |
+------------------------------------------------------------------+