[Asterisk-Users] spandsp / txfax exit codes / logging?

[Tomasz Chmielewski]

Doug Lytle schrieb:

(...)

>> Is it possible to somehow read spandsp / txfax exit codes?
>>
>>  
>>
> 
> Run Asterisk in debug mode [asterisk -d] and use the -debug option on 
> the spandsp command line.  Mine is as follows:
> 
> exten => s,3,rxfax(${FAXFILE}.tif,DEBUG)
> 
> After I get the debug output, I use cat and grep to break out the 
> app_rxfax.c to a fax log:
> 
> [root at asterisk asterisk]# cat full|grep -i app_rxfax.c >faxlog
> 
> With the output below:
> 
> Oct 27 15:36:10 DEBUG[21623] app_rxfax.c: 
> ============================================================================== 
> 
> Oct 27 15:36:10 DEBUG[21623] app_rxfax.c: Fax successfully received.
> Oct 27 15:36:10 DEBUG[21623] app_rxfax.c: Remote station id: 269xxxxxxx
> Oct 27 15:36:10 DEBUG[21623] app_rxfax.c: Local station id:
> Oct 27 15:36:10 DEBUG[21623] app_rxfax.c: Pages transferred: 5
> Oct 27 15:36:10 DEBUG[21623] app_rxfax.c: Image resolution:  7700 x 7700
> Oct 27 15:36:10 DEBUG[21623] app_rxfax.c: Transfer Rate:     9600
> Oct 27 15:36:10 DEBUG[21623] app_rxfax.c: 
> ============================================================================== 
> 

but the debug mode means extremely big logs :))

anyone knows how does the log look like for a successful fax 
transmission (so, sending fax from asterisk)?

I'm curious, as I have no problems with incoming faxes, but the outgoing 
doesn't seem to work well for some reason.


-- 
Tomek
http://wpkg.org
WPKG - software deployment and upgrades with Samba