[Asterisk-Users] asterisk using tdm400p has echo

[tmassey at obscorp.com]

asterisk-users-bounces at lists.digium.com wrote on 10/27/2005 03:11:11 PM:

> > Are these settings persistent across reboots?  The README for 
> fxotune seems to mention that you
> > need to do a "fxotune -s" in order to reload the card with the 
> analyzed settings (rather than
> > take the 20 minutes it seems to take on my 6 lines).  However, if 
> fxotune.conf is all 0's, I 
> sure
> > hope that the settings are persistent on the board! :)
> 
> The results of fxotune is written to /etc/fxotune.conf; I don't believe
> they are read back in unless you build something into a bootup script.

Correct.  From the README:

It will write a configuration file to /etc/fxotune.conf.  You will
need to have your system run fxotune with the -s flag (`fxotune -s`) to 
set the
module with the previously discovered values from fxotune.conf for it to 
take
affect, so essentially if each time you reboot the machine you need to run
`fxotune -s`.  You might consider putting it in your startup scripts some 
time
after the module loads and before asterisk runs.


However, my fxotune.conf contains only 0's for all 8 of each of 6 lines. 
I'm wondering does that mean that fxotune had no effect, or that whatever 
effect it does have is A) Persistent within the card between reboots and 
B) Not reflected by a fxotune.conf filled with 0's...

Tim Massey
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051027/56319452/attachment.htm