[Asterisk-Users] x100p (FXO) not being seen by asterisk (is my bestguess) .

[Mr. James W. Laferriere]

	Hello Phil ,

On Thu, 27 Oct 2005, Phil Pritchard wrote:
> only new to asterisk, but have had some hardware exp.....
> 
>    stay away from irq9 its tied to irq2 and will always be shared, Paul has
> the go.. in bios disable serial and or usb (if not using) and make sure irda
> is not enabled. another one is the lpt port if your not using that, there is
> another irq you can steel..
	ALL & I mean all serial/parrallel/...'everything I can find'... has been 
	turned off in the bios .  And I have recompiled a kernel with those same 
	items turned off in it .  That d??ned module wants to load at irq 9 no 
	matter what I do .  Of course there is no way to set irq's to a 
	particular pci slot in the bios .
	Does anyone now howto set irq say at the boot: or in modprobe.conf ?

> dont share interrupts, as a rule(if you can help it)... it usually leads to
> system instability and usually under load.
	Quite well understand this point .  Have heard it on this list many 
	times .  And am doing my best NOT too .

> UBCD ...(www.ultimatebootcd.com).  has some nice tools that can probe a system
> to give a second appinion on interrupt conflicts, ram and hard drive
> errors.....
> its my best tool for hardware problems..
	IMO ,  The mirrors have the su??iest download schemes I have seen in 
	some time .\IMO
	I have yet to burn that image but as soon as I do I'll boot it on that 
	piece of junk I bought for near next to nothing .  Which is almost what 
	it is worth ,  Nothing .

		Thank you for your input ,  Every bit helps .  JimL

> Mr. James W. Laferriere wrote:
> 
> > 	Hello Paul & all ,
> > 
> > On Wed, 26 Oct 2005, Mr. James W. Laferriere wrote:
> >  
> > > 	Hello Paul & all ,  I've tried everything I know to attempt to get the
> > > wcfxo.ko not to use irq 9 .  THe 6 line cord does not appear to effect
> > > 	the signaling to the x100p card ,  I have turned up the debugging &
> > > have 	that being syslog'd .  Have debugging on zaptel as well .
> > > Nothing seems 	out of the ordinary .  But monitoring from 'asterisk
> > > -d -vvvvv -nr' 	console does not show anything '.' .  Have I forgotten
> > > some 	configurations or magical incantation ?  Tia ,  JimL
> > > 
> > > On Wed, 26 Oct 2005, Paul wrote:
> > >    
> > > > First I don't like the 6 line cord.  Use an rj11 2 wire cord, but watch
> > > > the
> > > > crossover vrs straight on the old red and green.
> > > > 
> > > > Next the interrupt must be fixed.  Do this in the CMOS before you boot.
> > > > Go
> > > > to the PCI bus assignments and set the IRQ or go and disable the serial
> > > > ports thereby allowing irq 3 and 4 to be assigned.
> > > > 
> > > > :)
> > > > Paul
> > > >      
> > 	Sorry about the top posting ...  Also forgot the syslog output .
> > Tia ,  JimL
> > 
> > Oct 26 20:11:19 asterisk-test kernel: kobject zaptel: registering. parent:
> > <NULL>, set: module
> > Oct 26 20:11:19 asterisk-test kernel: subsystem zaptel: registering
> > Oct 26 20:11:19 asterisk-test kernel: kobject zaptel: registering. parent:
> > <NULL>, set: class
> > Oct 26 20:11:19 asterisk-test kernel: kobject zaptimer: registering. parent:
> > zaptel, set: class_obj
> > Oct 26 20:11:19 asterisk-test kernel: kobject zapchannel: registering.
> > parent: zaptel, set: class_obj
> > Oct 26 20:11:19 asterisk-test kernel: kobject zappseudo: registering.
> > parent: zaptel, set: class_obj
> > Oct 26 20:11:19 asterisk-test kernel: kobject zapctl: registering. parent:
> > zaptel, set: class_obj
> > Oct 26 20:11:19 asterisk-test kernel: Zapata Telephony Interface Registered
> > on major 196
> > Oct 26 20:11:19 asterisk-test kernel: kobject wcfxo: registering. parent:
> > <NULL>, set: module
> > Oct 26 20:11:19 asterisk-test kernel: kobject wcfxo: registering. parent:
> > <NULL>, set: drivers
> > Oct 26 20:11:19 asterisk-test kernel: PCI: Found IRQ 9 for device
> > 0000:01:02.0
> > Oct 26 20:11:19 asterisk-test kernel: PCI: Sharing IRQ 9 with 0000:00:1f.3
> > Oct 26 20:11:19 asterisk-test kernel: kobject zap1: registering. parent:
> > zaptel, set: class_obj
> > Oct 26 20:11:19 asterisk-test kernel: New regoffset: 7
> > Oct 26 20:11:20 asterisk-test kernel: wcfxo: DAA mode is 'FCC'
> > Oct 26 20:11:20 asterisk-test kernel: Found a Wildcard FXO: Wildcard X101P
> > Oct 26 20:11:20 asterisk-test kernel: Recalculating slaves on WCFXO/0/0
> > Oct 26 20:11:20 asterisk-test kernel: Done Recalculating slaves on WCFXO/0/0
> > (last is WCFXO/0/0)
> > Oct 26 20:11:20 asterisk-test kernel: Configured channel WCFXO/0/0, flags
> > 0201, sig 2004
> > Oct 26 20:11:20 asterisk-test kernel: Registered tone zone 0 (United States
> > / North America)
> > Oct 26 20:11:20 asterisk-test kernel: BATTERY!
> > Oct 26 20:11:39 asterisk-test kernel: Out of storage space
> > Oct 26 20:11:48 asterisk-test kernel: RING!
> > Oct 26 20:11:50 asterisk-test kernel: NO RING!
> > Oct 26 20:11:54 asterisk-test kernel: RING!
> > Oct 26 20:11:56 asterisk-test kernel: NO RING!
> > Oct 26 20:13:50 asterisk-test kernel: RING!
> > Oct 26 20:13:52 asterisk-test kernel: NO RING!
> > Oct 26 20:13:56 asterisk-test kernel: RING!
> > Oct 26 20:13:57 asterisk-test kernel: NO RING!
-- 
+------------------------------------------------------------------+
| James   W.   Laferriere | System    Techniques | Give me VMS     |
| Network        Engineer | 3542 Broken Yoke Dr. |  Give me Linux  |
| babydr at baby-dragons.com | Billings , MT. 59105 |   only  on  AXP |
+------------------------------------------------------------------+