[Asterisk-Users] SPA3000 as trunk - no caller ID

[Kerry Garrison]

I am connected to Cox Cable telephone service which nicely passes CID when
using an X100P card but am not getting CID when using the SPA3000. I am
using 3.1.5(GWb) -Kerry
 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
asterisk at txpe.net
Sent: Wednesday, October 26, 2005 9:57 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] SPA3000 as trunk - no caller ID

What are you plugging into the FXO port?  I have two SPA-2000's.  One is
connected to an SBC POTS line and the other to a Vonage Cisco ATA186.  The
SPA3k connected to the SBC POTS passes CID info, the one connected to the
Cisco ATA will not.  I have tried many things mentioned at AAH SF.net site
and Voxilla's forums (and probably a few
others) and was never able to get it to pass the CID info.  According to the
Samurize program and the SPA3k web page, the SPA3k is receiving the CID info
from the Cisco ATA.  I gave up and now I have my Vonage line forward all
calls to my Teliax account.

I'm running 3.1.3(GWa) on both units.

At 09:37 AM 10/26/2005, you wrote:
>Following the instructions at http://geekgazette.com, I have the 
>SPA-3000 setup as a SIP trunk. This is working flawlessly with one 
>exception, it isn't passing caller ID. Regardless of what settings I 
>have tried, I can't seem to figure this out. Has anyone else got it to
work?
>-Kerry

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users