[Asterisk-Users] SPA3000 as trunk - no caller ID

[Kerry Garrison]

A phone plugged into it will grab the CID on about the second ring and I
have adjusted the SPA3000 out to 5 rings with no difference. What gets
passed to asterisk is whatever is set in the 3000's Display Name field. If
the Display Name field is blank, then nothing comes across and the phones
display 'Unknown'. I have been wondering if there is a variable you can put
into the display field. There are some fields that use variables like $PROXY
and $NOTIFY, of course simply trying $CID uses '$CID' as the caller ID.

On trick I saw before was to add something like A to the caller id number
prefix and then strip it out in Asterisk. However, possibly with the latest
SPA3000 firmware, if you put an A into the caller id number prefix, the
SPA3000 will not answer.

-Kerry


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Paul
Sent: Wednesday, October 26, 2005 7:58 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] SPA3000 as trunk - no caller ID

Kerry Garrison wrote:

>Following the instructions at http://geekgazette.com, I have the 
>SPA-3000 setup as a SIP trunk. This is working flawlessly with one 
>exception, it isn't passing caller ID. Regardless of what settings I 
>have tried, I can't seem to figure this out. Has anyone else got it to
work?
>-Kerry
>
>  
>
Is it answering too soon? Plug a phone with caller ID feature or a caller ID
display in parallel so you can be sure that the caller ID info is received
before the SPA-3000 goes off-hook.

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users