[Asterisk-Users] Sangoma A104 errors

[Sharon]

>besides shouldn't it be type 2 national.  Not sure if that's an option, but
> when I compile, I use the option 3 and the pri only needs the channels and
> the d chan specified.  So I never noticed if it said type 2.

didn't get wht u meant here? wht type r u talking abt?


> Are you using the newest drivers from Sangoma?  There was an update due to
> the revision in asterisk/zaptel and the patch point was modified by Sangoma.
>
> If you used CVS to obtain the latest Zaptel / or used the latest A104
> drivers without the latest CVS, the patch point is wrong and Sangoma
> compiled wrong.
yes i used the newest drivers from Sangoma. and i'm running cvs
head(downloaded around start of august)



On 10/25/05, Paul <paul at siliconvp.com> wrote:
> Are you using the newest drivers from Sangoma?  There was an update due to
> the revision in asterisk/zaptel and the patch point was modified by Sangoma.
>
> If you used CVS to obtain the latest Zaptel / or used the latest A104
> drivers without the latest CVS, the patch point is wrong and Sangoma
> compiled wrong.
>
> Besides shouldn't it be type 2 national.  Not sure if that's an option, but
> when I compile, I use the option 3 and the pri only needs the channels and
> the d chan specified.  So I never noticed if it said type 2.
>
> :)
> Paul
>
>
>
>
> -----Original Message-----
> From: Sharon [mailto:asteriskgirl at gmail.com]
> Sent: Tuesday, October 25, 2005 10:37 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asterisk-Users] Sangoma A104 errors
>
> I am using a A104 Sangoma card. We are runningasterisk cvs head on our
> production box.After wanpipe configuration I am receiving the below
> mentioned error.
> pri show span looks good as below.
>
> pri show span 1
> Primary D-channel: 24
> Status: Provisioned, In Alarm, Down, Active
> Switchtype: National ISDN
> Type: CPE
> Window Length: 0/7
> Sentrej: 0
> SolicitFbit: 0
> Retrans: 0
> Busy: 0
> Overlap Dial: 0
> T200 Timer: 1000
> T203 Timer: 10000
> T305 Timer: 30000
> T308 Timer: 4000
> T313 Timer: 4000
> N200 Counter: 3
>
> error on the server:
>
> Write to 33 failed: Bad address
> Short write: 0/5 (Bad address)
>
>
> Any help appreciated.
> Thank you,
>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>