[Asterisk-Users] configuring Cisco 7905G for SIP - how?

[tijmen van den brink]

I set up a Cisco 7960 in about 20 minutes with this document. I hope it
works for you.

http://www.asteriskguru.com/tutorials/cisco_7960_ip_phone_configuration.html


On 10/24/05, Tomasz Chmielewski <mangoo at wpkg.org> wrote:
>
> After reading the specifications of Cisco 7905G phone ("supports SIP,
> easy to manage" etc.), we were so foolish and bought it.
> Now we learned the hard way that we have to pay additionally for SIP
> firmware.
>
> So two months after purchase, after much struggle with Cisco
> the-so-called "support" we have a shiny Cisco 7905G phone, support
> contract, and a newly downloaded SIP firmware.
>
> Unfortunately, the instructions attached to the SIP firmware seem to be
> for a different phone, as they state that the 7905G phone should
> download "lddefault.cfg" config file (which took some time to configure,
> as it's 50 kilo big). In our case, the 7905G phone tries to download
> SEP0014690620AA.cnf.xml, and XMLDefault.cnf.xml.
>
>
> Does anyone have a good, step-by-step SIP upgrade instruction for this
> phone?
>
>
> --
> Tomek
> http://wpkg.org
> WPKG - software deployment and upgrades with Samba
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com <http://Easynews.com>--
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>



--
Tijmen van den Brink
Wilhelminaweg 46
3441 XC Woerden
Tel: 0642233831
MSN: tijmenvandenbrink at hotmail.com
Skype: tijmenvdbrink at skype.com
SIP:697116 at fwd.pulver.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051024/ea901986/attachment.htm