[Asterisk-Users] Problem with compiling spandsp

[Carlos Alperin]

Download from where? There is not such files on the
http://www.softswitch.org place.

Carlos Alperin


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Craig Guy
Sent: Tuesday, October 18, 2005 1:52 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Problem with compiling spandsp

Download the latest app_rxfax.c and app_txfax.c for pre21 (Dated 12 October 
2005).  For the first week or so pre21 was available the older versions were

posted by mistake and caused exactly this compilation error.

Craig

----- Original Message ----- 
From: "Administrator" <Administrator at Dunninvestments.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Tuesday, October 18, 2005 3:53 AM
Subject: RE: [Asterisk-Users] Problem with compiling spandsp


Actually I am using 0.0.2pre21, also tried pre20....finally got a
different error after trying just about everything including deleting
the source dir and unpacking again, editing makefile again, etc.

app_rxfax.c: In function `rxfax_exec':
app_rxfax.c:265: error: structure has no member named `logging'
app_rxfax.c: At top level:
app_rxfax.c:61: warning: 't30_flush' defined but not used
make[1]: *** [app_rxfax.o] Error 1
make[1]: Leaving directory `/usr/src/asterisk-1.0.9/apps'
make: *** [subdirs] Error 1

Maybe I'm not editing the makefile correctly?  I am cutting/pasting from
the patchfile so I know it's not a typo.

-----Original Message-----
From: Doug Lytle [mailto:support at drdos.info]
Sent: Friday, October 14, 2005 6:14 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Problem with compiling spandsp


Administrator wrote:

> New asterisk user, pretty much set up except for spandsp. I get the
> following when trying to compile:
>
>     app_rxfax.c
>     app_rxfax.c: In function `phase_e_handler':
>     app_rxfax.c:92: error: structure has no member named `cid'
>     app_rxfax.c:92: error: structure has no member named `cid'
>     app_rxfax.c: In function `rxfax_exec':
>     app_rxfax.c:260: error: structure has no member named `verbose'
>     app_rxfax.c: At top level:
>     app_rxfax.c:61: warning: 't30_flush' defined but not used
>     make[1]: *** [app_rxfax.o] Error 1 I'm running and compiling
> against Asterisk 1.0.9 on a CentOS4_x86_64 system.  Asterisk alone
> compiles and is running without issue.  I can't find any problem with
> dependencies.  Any help would be appreciated.
>
I had the same issues with .0.0.3 and went back to the 0.0.2 version

0.0.3 is for developers.

Doug


_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users