[Asterisk-Users] How to configure two Asterisk servers for one call center

[Tielin Xu]

Digium sells single card handling for 4 T1s, and told me that one server
can carry those four T1s without performance problem.

>>> erik at infopact.nl 10/21/05 10:12 AM >>>
4 T1/PRI Per server...

T1 --> 24 B Channels, in total 8 T1 --> 8*24 = 192 B channels, or in
the case of PRI 240 channels...

trixter aka Bret McDanel wrote:
> On Fri, 2005-10-21 at 09:39 -0700, Tielin Xu wrote:
> 
>>Hi All:
>>
>>I have a situation to be resolved.
>>Assume that one location call center with 150 agents.
>>I have two asterisk servers to serve those 150 sip phones. The
servers
>>are connected to PSTN as 4 T1/PRI for each. 
> 
> 
> My question is why do you have about 150% the agents to the line
> capacity?  Even with pauses and all do you expect that the 96 (or
less
> in the case of pri) lines to be in use at all times? 
> 
> 
> 
>
------------------------------------------------------------------------
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users 
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users 


_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users 
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users