[Asterisk-Users] R2...channel type UniCall

[Steve Underwood]

Hi,

Philip Fleischer wrote:

> I have done the mfc r2 setup as described in the wiki but
> when I try a call
>
> Oct 21 10:02:24 WARNING[14127]: channel.c:1913 ast_request: No channel 
> type registered for 'UniCall'
> Oct 21 10:02:24 NOTICE[14127]: app_dial.c:764 dial_exec: Unable to 
> create channel of type 'UniCall'
>  == Everyone is busy/congested at this time
>
>
> I have a TE210p with an E1 crossover cable connecting the two ports.  
> (Tests
> out OK doing PRI ISDN or simple channelized E1 to E1.)
> I have green lights on the card with ztcfg reporting all the channels.
>
>
> In extensions.conf I use
>
> exten => _981X.,1,Dial(UniCall/1/${EXTEN:3},20)
> exten => _982X.,1,Dial(UniCall/35/${EXTEN:3},20)
>
> and the unicall.conf contains standard stuff and:
>
> loglevel=255
> protocolclass=mfcr2
> protocolvariant=cn,20,7
> protocolend=co
> group = 1
> ;  1st E1
> channel => 1-15
> channel => 17-31
>
> protocolend=cpe
> group = 2
> ; 2nd E1
> channel => 31-46
> channel => 48-62
>
> How does the unicall channel get registered?
>
If you want to follow the instructions on the wiki, maybe you should ask 
the wiki to sort it out for you. :-)

Steve