[Asterisk-Users] Help on Asterisk and Client SIP setup

[Chrispen Chisvo]

I want to use SIP.

So I want to configure a SIP Xlite to register onto the PBX.

whats are the steps to:
- add an extension for sip in the asterisk PBX when I have an Xlite extension 
with the following configurations:
- username: user1
- authorised user: chris
- password:****
- Domain/Realm: 192.168.1.37
- SIP Proxy: 192.168.1.37
- Out Bound Proxy: 192.168.1.37

What would be extension add syntax?

rgds
CC

On Thursday 20 October 2005 06:39, Bartosz Piec wrote:
> Chrispen Chisvo napisał(a):
> > I want to add extensions for a simple test. I have added the extensions
> > like
> >
> > add extension 137,1,Dial,IAX/192.168.1.37/137 into local
> >
> > what I am not clear of is IAX?
>
> Are you sure you are using IAX? Below you are writing about SIP...
>
> > Unfortunaltely a client lite xlite will require me to specify username,
> > password, and domain, and yet I am not clear where to define the user and
> > the domain on the Asterisk PBX.
>
> Read about sip.conf and extensions.conf. This is good place to start:
> http://www.voip-info.org/wiki-Asterisk

-- 
Rgds
Chrispen Chisvo
Ecoweb Zimbabwe
Cell: +263 91 222 443
Tel: +263 4 758 194