[Asterisk-Users] Problem with Swissvoice IP10S and Asterisk

[Arnaud Bled]

hi

Which Firmware Version is loaded on the SwissVoice ?
Because only the latest version are RFC3261 based
i can send you offlist a 1.0.0 build Version



//arnaud







At 12:35 20/10/2005, you wrote:
>Hello,
>
>I've got Swissvoice IP10S (SIP) phone and I'm trying it to communicate 
>with Asterisk. When I dial from external, the phone rings. But...
>On the phone lcd there is a "Waiting for proxy server..." message all the 
>time. Why is it? Phone is set to register in its config. 'sip show peers' 
>tells that everithing is ok:
>
>*CLI> sip show peers
>Name/username    Host            Dyn Nat ACL Mask             Port Status
>64               192.168.99.2                255.255.255.0    5060 OK (60 ms)
>
>I cannot dial from phone to anywhere (busy signal).
>
>Here is my config:
>sip.conf as in samples, with added at the end:
>
>[xx]
>type=friend
>host=192.168.99.2
>mask=255.255.255.0
>threewaycalling=yes
>transfer=yes
>singlepath=yes
>callwaiting=no
>cancallforward=yes
>callerid = Sven Svoboda
>qualify=yes
>username=xx
>secret=xx
>canreinvite=no
>nat=no
>
>extensions.conf as in samples, with added in the [demo] section:
>exten => xxxxxxx,1,Dial(SIP/xx)
>
>(xxxxxxx is the number I calling from)
>
>--
>Best regards,
>Bartosz Piec
>_______________________________________________
>--Bandwidth and Colocation sponsored by Easynews.com --
>
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users

--