[Asterisk-Users] chan_capi-0.6 configuration Query with Eicon Diva 4BRI

[Voicomm User]

Okay let me share my experience.

I had 'controller=1,2,3,4' and 'devices=2' in my capi.conf

Devices should be the *sum* of capacity of all controllers i.e in my
case 'devices=8'.

For some reason the exchange didn't like it when I had my controllers
listed over mutiple lines, i.e like john's config. Caller kept getting
the message "service not compatible".

Hope this helps.
-r

On 10/20/05, John Daragon <john at argv.co.uk> wrote:
> Voicomm User wrote:
> > So, are you saying 'msn=' parameter is not required for both Point to
> > Point and Point to Multi Point?
> >
>
> Yep.  Dial syntax used to be CAPI/<MSN>:<number> so each controller
> needed at least one MSN.
>
> with 0.6 you can only dial by group, controller or interface name :
>
>
> Dial(CAPI/g1/<number>)
> Dial(CAPI/contr1/<number>)
> Dial(CAPI/<name I gave this controller>/number)
>
>
> You *will* have to set incomingmsn either to a real number or *.
>
> jd
>
> --
>
> John Daragon                                          john at argv.co.uk
> argv[0] limited
> Lambs Lawn Cottage,  Staple Fitzpaine,  Taunton,  TA3 5SL,  UK
> v +44 (0) 1460 234068   f +44 (0) 1460 234069   m +44 (0) 7836 576127
>
>
>