[Asterisk-Users] chan_capi-0.6 configuration Query with Eicon Diva 4BRI

[Voicomm User]

So, are you saying 'msn=' parameter is not required for both Point to
Point and Point to Multi Point?

thanks
-r

On 10/20/05, John Daragon <john at argv.co.uk> wrote:
> Voicomm User wrote:
> > Hello
> >
> > Hardware: Eicon Diva 4BRI ISDN Card
> > Software : Asterisk : Asterisk CVS-v1-0-08/13/05-19:51:52
> >                Chan Capi: chan_capi-0.6
> >
> > We are using an Eicon 4BRI ISDN Card here in Australia with Asterisk,
> > connected to 4 OnRamp services with Telstra.
> >
> > There are 8 available channels, but after upgrading to latest capi
> > driver we notice that the box is not able to handle more than 2 calls
> > at the same time. An engaged signal is heard at the other end. After
> > this happens once, some calls fail even when all channels are free.
> > I don't see any messages on console for failes calls. Even when I turn
> > on 'capi debug' and 'set verbose 20'.
> >
> > The telstra personnel have confirmed busy signal is sent out by the
> > PABX. But its bizarre not to see any messages. No error messages are
> > logged as well.
> >
> > capi info :
> > Contr1: 2 B channels total, 2 B channels free.
> > Contr2: 2 B channels total, 2 B channels free.
> > Contr3: 2 B channels total, 2 B channels free.
> > Contr4: 2 B channels total, 2 B channels free.
> >
> > capi.conf
> >
> > [general]
> > nationalprefix=0
> > internationalprefix=00
> > rxgain=0.8
> > txgain=0.8
> >
> > [isdn]
> > isdnmode=ptp     ; Is this correct for Point to Point Mode?
> > msn=<8 digit local number>
> > group=1
> > incomingmsn=*
> > controller=1,2,3,4 ; there are 4 controllers
> > devices=2           ; should this be 8?
> > softdtmf=on
> > relaxdtmf=on
> > accountcode=
> > context=main-menu
> > echocancelold=yes
> > ;echocancel=yes  ; Turning this on gives a error message each time a
> > call is terminated.
> > usecallerid=yes
> > callerid=asreceived
> > ;echosquelch=1
> > ;echotail=64
> > ;callgroup=1
> > ;pickupgroup=1
>
> The syntax has changed a bit. Time was when the "devices=" line
> basically said "OK, that's this controller done with, let's commit that
> and start on the next one..."  With 0.6 (if I read it correctly) it goes :
>
> [general]
> .
> .
>
> [some_string]
>
> group=1
> isdnmode=did   <-- note this has changed  [DID/MSN]
> incomingmsn=*
> rxgain=1.0
> txgain=0.8
> controller=1
> softdtmf=0
> accountcode=
> context=from-pstn
> echosquelch=0
> echocancel=yes
> echotail=64
> devices=2
>
> [some_other_string]
>
> group=1
> isdnmode=did
> incomingmsn=*
> rxgain=1.0
> txgain=0.8
> controller=2
> softdtmf=0
> accountcode=
> context=from-pstn
> echosquelch=0
> echocancel=yes
> echotail=64
> devices=2
>
> Hope this helps...
>
> jd
>
>
> --
>
> John Daragon                                          john at argv.co.uk
> argv[0] limited
> Lambs Lawn Cottage,  Staple Fitzpaine,  Taunton,  TA3 5SL,  UK
> v +44 (0) 1460 234068   f +44 (0) 1460 234069   m +44 (0) 7836 576127
>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>