[Asterisk-Users] Digium TDM400P (11B) problems

[Philip Murray]

Hi Rich,

On 20/10/2005, at 2:42 PM, Rich Adamson wrote:
>> <snip>
>>
>>
>> dmesg:
>> PCI: Found IRQ 12 for device 0000:00:0a.0
>> Freshmaker version: 71
>> Freshmaker passed register test
>> Module 0: Installed -- AUTO FXS/DPO
>> Module 1: Not installed
>> Module 2: Not installed
>> Adjusting gain
>> Module 3: Installed -- AUTO FXO (NEWZEALAND mode)
>> Found a Wildcard TDM: Wildcard TDM400P REV E/F (2 modules)
>>
>
> Assuming you copy/pasted the above accurately, the output
> from dmesg is missing the stuff related to Module 4. You might
> also try zttool to see what it thinks is going on.

That is all the output in dmesg, is there any other output in  
particular you were expecting? It's zero-based so Module 3 is the 4th  
module on the card.

zttool doesn't report any alarms or anything of note. What does the  
loop button do?

Cheers

Phil Murray