[Asterisk-Users] (no subject)

[Asterisk]

I am having the same problem, but on both PSTN and a Voicepulse Connect 
IAX line.  PSTN rings clicks dead air, then rings and connects, IAX just 
clicks, has dead air, rings and connects.  Don't have a clue on how to 
fix it though.

Greg

Roger Johnsen wrote:

>I have a Wildcard TDM400P card being used with Asterisk.  For some
>reason, incoming PSTN calls are getting delayed before they ring through
>on the Asterisk PBX to an extension.  The calling party hears an initial
>ring tone and then a click noise, at which point it will then actually
>starts to ring the target extension.  I had done some research and saw
>similar problems that seemed to relate to caller ID so turned it off but
>still had the same "one ring, click" delay problem.  I've turned it back
>on and verified the behavior is the same so I'm not sure this is the
>problem.
>
>Essentially I'd like the call to ring through immediately and not
>perform this one ring click until the call is routed to the correct
>line.  Has anyone else seen this and is there a way to fix the problem?
>Please let me know if I can provide any additional information.
>
>-Roger
>_______________________________________________
>--Bandwidth and Colocation sponsored by Easynews.com --
>
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>  
>