[Asterisk-Users] Can you use Polycom 500 with PoE Switch?

[Cory Andrews]

Robert - The Polycom IP500 can be powered via PoE, but it will require a 
special cable in order to do so.

Also you need to know what type of PoE device you are using to power 
your Polycom phones.

If you are using a Cisco PoE capable switch, such as the 
WS-C3550-24PWR-SMI, WS-C3524-PWR-XL-EN, or any other Cisco PoE device, 
then you
need this specific Polycom PoE Cable - Polycom Model # 2200-11014-002

If you are using any other 802.3af PoE switch or midspan device to power 
your phones,
you need this Polycom PoE Cable - Polycom Model # 2200-11077-002

Kind of tricky, to review....

2200-11014-002 for "Cisco" PoE Switches or Injectors

2200-11077-002  for any other type of PoE Switch, Midspan or Injector


Cory Andrews
Senior Partner
+++++++++++
VOIPSupply.com
454 Sonwil Drive
Buffalo, NY 14225
+++++++++++
voice - 716.630.1555 X22
email - Cory at VOIPSupply.com
fax - 716.630.1548



Robert Augustyn wrote:

>Hi,2200-11077-002 
>
>Do you need a special cable and power for that unit or you can run it of PoE
>Switch?
>Thanks.
>robert
>
>_______________________________________________
>--Bandwidth and Colocation sponsored by Easynews.com --
>
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>  
>