[Asterisk-Users] No Audio from Console but mpg123 from shell worksfine.

[Jonathan k. Creasy]

Anyone have anything on this? (I'm sure someone will complain about me
bringing it up again, chill out...)

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jonathan
k. Creasy
Sent: Friday, October 14, 2005 10:15 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] No Audio from Console but mpg123 from shell
worksfine.

I get audio from mpg123 at the command line but when I load up asterisk
and try to get audio from the console it looks like it's working, and
even pauses like it is playing the file but there is no audio coming
from the speakers. 

I have searched and looked through the archives and tried to fix this
but I have had no success. This is an onboard Intel card (AC'97) and I
also tried an SB Live card with the same result. 

-Jonathan

*****************************************
Asterisk startup: (asterisk -vvvvvvvvvvvc)
*****************************************

[chan_oss.so] => (OSS Console Channel Driver)
  == Parsing '/etc/asterisk/oss.conf': Found
  == Registered channel type 'Console' (OSS Console Channel Driver)

*****************************************
Dial 100:
*****************************************

*CLI>     -- Executing Answer("OSS/dsp", "") in new stack
 << Console call has been answered >>
    -- Executing Playback("OSS/dsp",
"tones-that-follow-are-for-the-deaf") in new stack
    -- Playing 'tones-that-follow-are-for-the-deaf' (language 'en')

*****************************************
*** pause while it plays but no audio ***
*****************************************

    -- Executing Hangup("OSS/dsp", "") in new stack
  == Spawn extension (default, 100, 3) exited non-zero on 'OSS/dsp'
 << Hangup on console >>

*****************************************
Exit asterisk: (ctrl-c which normally I wouldn't do)
*****************************************

Beginning asterisk shutdown....
Executing last minute cleanups
  == Destroying musiconhold processes
Yuck! Error in buffer handling...: Connection reset by peer
Asterisk cleanly ending (2).

*****************************************
Run mpg123 (Plays fine): (don't need the /dev/dsp, I was just trying to
make mpg123 not work to hopefully find out why asterisk doesn't)
*****************************************

[root at copc ~]# mpg123 -d /dev/dsp
/var/lib/asterisk/mohmp3/TristeAlegriaPromo.mp3
High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2 and 3.
Version 0.59r (1999/Jun/15). Written and copyrights by Michael Hipp.
Uses code from various people. See 'README' for more!
THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK!
Title  : 10 - Track 10                   Artist: <Unknown>
Album  : PROMO                           Year  :
Comment:                                 Genre : Club

Directory: /var/lib/asterisk/mohmp3/
Playing MPEG stream from TristeAlegriaPromo.mp3 ...
Junk at the beginning 49443303
MPEG 1.0 layer III, 128 kbit/s, 44100 Hz joint-stereo

[0:02] Decoding of TristeAlegriaPromo.mp3 finished.
[root at copc ~]#

*****************************************
Extensions.conf
*****************************************

exten => 100,1,Answer
exten => 100,2,Playback(tones-that-follow-are-for-the-deaf)
exten => 100,3,Hangup


*****************************************
oss.conf
*****************************************
;
; Open Sound System Console Driver Configuration File
;
[general]
;
; Automatically answer incoming calls on the console?  Choose yes if
; for example you want to use this as an intercom.
;
autoanswer=yes
;
; Default context (is overridden with @context syntax)
;
context=default
;
; Default extension to call
;
extension=s
;
; Default language
;
;language=en
;
; Silence supression can be enabled when sound is over a certain
threshold.
; The value for the threshold should probably be between 500 and 2000 or
so,
; but your mileage may vary.  Use the echo test to evaluate the best
setting.
;silencesuppression = yes
;silencethreshold = 1000
;
; On half-duplex cards, the driver attempts to switch back and forth
between
; read and write modes.  Unfortunately, this fails sometimes on older
hardware.
; To prevent the driver from switching (ie. only play files on your
speakers),
; then set the playbackonly option to yes.  Default is no.  Note this
option has
; no effect on full-duplex cards.
;playbackonly=yes

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users